651535
13
Zoom out
Zoom in
Previous page
1/18
Next page
E11
16. CD Player Control and Operation
The operation and control of all Naim CD players is based on a common user interface. This section of the manual describes
the user interface, drawing attention to dierences between players where they occur.
The CD player control buttons are duplicated on the remote control handset which may also provide some extra functions.
The handset also provides CD programming facilities. See Sections 17 and 18 for more information.
16.1 Player Controls
door: Opens and closes the door (CD555 only).
disp: Scrolls through the display options of track,
time and display o (CD555 only).
Note: The CDX2, CD5 XS and CD5si display options can
be scrolled by pressing the remote handset disp key.
prev: Steps through the disc backwards, either one
track at a time, or sequentially if the button is
held.
next: Operates in the same way as the prev button,
but moving forwards instead of backwards.
pause: Pauses play. Pressing pause a second time will
resume play. The pause button indicator will
ash when pause is selected (CD555 only).
Note: The CDX2, CD5 XS and CD5si can be paused by
pressing the remote handset pause key.
Note: If a player is paused for more than 10 minutes it
will enter a “static pause” mode in which the transport
deactivates to reduce wear. The player can be left in static
pause mode indenitely. The pause button indicator will
illuminate fully when the player is in static pause mode.
stop: Stops play and resets the player to its start
condition. Pressing and holding stop will clear
any programmed play order, or, if no play
order is programmed, return the player display
to its defaults.
play: Plays a disc from track one unless another
track has been selected. Pressing play while a
track is playing will re-start the track.
16.2 Player Control Modes
CD players have an optional control mode. This provides an
alternative interface in which fast forward and fast reverse
(rather than step forwards and step backwards) can be
selected by pressing and holding the CD player next and
prev buttons respectively. The alternative interface also
provides a pause function on CDX2, CD5 XS and CD5si
players selected by pressing and holding the play button.
To select the optional mode press and hold next while the
player switches on. To select the standard control mode
press and hold prev while the player switches on.
16.3 Player Display and Indicators
The alphanumeric display indicates track and index
numbers, time in minutes and seconds, or system messages.
If a play list is programmed the time displayed reects the
duration of the programme. Depending on the model in
question, some or all of the indicators described below will
be found adjacent to the display:
HDCD: Indicates that an HDCD encoded disc is
playing.
Note: HDCD decoding is not implemented in the CD5si.
repeat: Indicates that repeat has been selected from
the remote handset.
prog: Indicates that a play list has been
programmed.
track: Indicates display of number of tracks or
current track.
pause: Indicates that the player is paused.
stop: Indicates that the player is stopped.
play: Indicates that the player is playing.
time: Indicates display of disc time or track time.
16.4 Output Socket Selection
A pair of RCA Phono output sockets are tted on CD player
rear panels to provide an alternative to the preferred DIN
socket. Proceed as follows to select the RCA Phono sockets.
With the player stopped, press and hold the remote
handset disp function (handset in CD mode) or, if tted,
the player disp button until the CD player prog indicator
ashes. Further operations of the disp function will now
cycle through each combination of the two socket types
(DIN only, RCA Phono only or both). The selected option is
indicated on the CD player display as shown below.
Socket Option Player Display
DIN O
Phono O O
Both O O O
Press and hold the disp function a second time to exit from
socket selection mode.
To avoid compromised sound quality, do not select both
unless their simultaneous use is unavoidable.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim CD555 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim CD555 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim CD555

Naim CD555 User Manual - German - 18 pages

Naim CD555 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info