602923
25
Zoom out
Zoom in
Previous page
1/34
Next page
DYNAMIC RANGE
The level of compression of stations can be set to eliminate the dierences in
dynamic range or sound level between radio stations. Popular music would
normally be more compressed than classical music, resulting in possible
dierent audio levels when changing from one station to the other. Setting the
Dynamic Range to “D-Range 0” means no compression, “D-Range 1/2” indicates
medium compression and “D-Range 1” shows maximum compression. No
compression is recommended, especially for classical music.
1 While listening to a DAB broadcast, press front panel’s [MENU] button
and then [TUNE / ] to select “Dynamic range”. Press [ENTER].
2 Toggle [TUNE / ] to select through “D-Range 0”, “D-Range
½”and “D-Range 1”. The upper line display shows the current dynamic
range setting while the lower line display will show the choices for the
dynamic range values.
3 Press [ENTER] to select desired Dynamic Range level.
TUNE AID
This option allows you to directly tune to a desired channel and include it in the
service list (if not yet available at the time). You can also use TUNE AID to assist
you in positioning the DAB antenna for best reception of the desired channel.
1 While listening to a DAB broadcast, press front panel’s [MENU] button
and then [TUNE / ] to select Tune aid”. Press [ENTER]. The
current channel and frequency are shown in the lower line of the VFD.
The number of o” displays at the upper line of the VFD indicates the
signal strength level of the current channel.
2 To select other channels, toggle [TUNE / ] to step through the
channel list. Release [TUNE / ] when you have arrived at your
desired channel. To improve the reception of the selected channel, adjust
or reposition the DAB antenna until the best reception is indicated.
3 Press [ENTER] to tune the selected channel.
NOTE
Thenumberofensemblesandstationsthatcouldbescannedwillvary
dependingonyourlocation.
PRUNE LIST
There maybe situations wherein certain stations become inactive. The
“Prune List” option enables the deletion of these inactive stations in the
service list.
1 While listening to a DAB broadcast, press front panel’s [MENU] button
and then [TUNE / ] to select “Prune List”.
2 Press [ENTER]. Use [TUNE / ] and then press [ENTER] to select
between “Cancel” or “OK? [SELECT]”. Any inactive stations (normally
stations preceded by a “?” mark) are automatically deleted when “OK?
[SELECT]” is selected. Otherwise, select “Cancel”.
INFORMATION SETTINGS
While listening to a DAB broadcast, the type of information displayed in the
lower line of the VFD can be varied. Toggle front panel’s [DISPLAY] button
to step through the following display options:
Program Type
Station Name
Time and Date
Audio Signal information
Channel and frequency
Signal Q
Software version
PROGRAM TYPE
This is a description of the type of broadcast supplied by the station, such
as Pop, Rock, Drama and the likes.
STATION NAME
The name or identication of the DAB broadcast station is shown.
TIME AND DATE
The current time and date as supplied by the DAB station are displayed.
AUDIO SIGNAL INFORMATION
Displays the bit rate and audio type (stereo, mono or joint stereo)
as transmitted by the DAB broadcast provider. These are set by the
broadcaster to suit the type and quality of material being transmitted.
CHANNEL AND FREQUENCY
The channel and frequency of the currently tuned DAB broadcast are
displayed.
SIGNAL QUALITY
This displays the digital error rate (0 to 99) of the currently tuned channel
- the lower the gure, the better the quality of the received broadcast.
SOFTWARE VERSION
Show the version number of the installed software.
OPERATION
USING THE VISO TWO  AM/FM/DB/iPod
25
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD VISO TWO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD VISO TWO in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD VISO TWO

NAD VISO TWO User Manual - German - 34 pages

NAD VISO TWO User Manual - Dutch - 34 pages

NAD VISO TWO User Manual - French - 36 pages

NAD VISO TWO User Manual - Italian - 34 pages

NAD VISO TWO User Manual - Swedish - 34 pages

NAD VISO TWO User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info