602923
10
Zoom out
Zoom in
Previous page
1/34
Next page
1 SPEAKERS: Connect the left and right terminals to the corresponding
loudspeakers. Each output’s “+” (red) terminal and “-” (black) terminal
must be connected to the corresponding “+” and “-” terminals of the
loudspeaker. Use extra care to ensure that no stray wires or strands cross
between posts or terminals at either end.
NOTES
• Usestrandedwireofatleast16-gauge(AWG);specializedspeakercable
maybevaluable(consultyourNADaudiospecialist).Connectionsto
theVISOTWOcanbemadewithbanana-typeplugs,orusingbarewire,
orpins,bylooseningtheterminal’splasticnut,makingaclean,neat
connection,andre-tighteningcarefully(usethetransverseholethrough
thepostforbare-wireorpinconnections).Tominimizethedanger
ofshort-circuits,ensurethatonly1/2-inchofexposedwireorpinis
employedinconnecting.
• Thisunitisdesignedtoproduceoptimumsoundqualitywhenconnectedto
speakerswithimpedanceswithinthereceiver’soperatingrange.Pleasecheck
that speakers are rated to be 8 ohms minimum per speaker.
2 FM ANTENNA INPUT: The supplied wire dipole FM antenna will
connect to the FM connector using the supplied balun adapter. It will
usually work best when mounted on a vertical surface such as a wall,
with arms fully outstretched forming a horizontal T perpendicular to
the origin point of the signal.
3 AM ANTENNA INPUT: Connect the supplied AM loop antenna to
these terminals. If an external AM antenna is used, make connections to
the AM and GND terminals in accordance with the instructions supplied
with the antenna. See also section about “LISTENING TO AM/FM RADIO”.
4 CABLE/SAT & VCR: Connect to these inputs S-Video, composite
video, and analog audio from source components such as cable TV
decoders, satellite tuners, another DVD player or other applicable
ancillary devices. VCR may be used with recording components such
as videocassette or DVD-recorders. Connect the VCR OUT (audio/video)
to these components’ corresponding audio/video input. Note that VCR
may freely be used for play-only components, in which case their OUT
jacks would remain unconnected.
5 SUBW (SUBWOOFER) PRE OUT: Connect this output to a powered
(active) subwoofer or to a power amplier channel driving a passive system.
6 DAB MODULE INPUT (Europe version only): Plug-in the other end
of the Mini-Din connector from the NAD DAB Adaptor DB 1 module
output port into this socket. The VISO TWO is compatible only with
NAD DAB Adaptor DB 1 so check with your NAD dealer for this modules
availability. With DAB, you can receive CD-like quality programs without
any annoying interference and signal distortion.
7 MP DOCK: The VISO TWO is equipped with a data port in the rear
panel where an optional “NAD IPD 1 Dock with iPod” (NAD IPD 1) can be
plugged in. Connect the “MP DOCK (DATA PORT)” jack of the VISO TWO
to the corresponding “DATA PORT socket of the optional NAD IPD 1.
8 COAXIAL IN, OPTICAL IN: Connect to the optical or coaxial S/PDIF-
format digital output of sources such as CD or DVD players, HDTV or
satellite tuners and other components.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
PleasemakesurethattheVISOTWOispoweredoorunpluggedbeforemakinganyconnections.Itisalsoadvisabletopower-downorunplugall
associatedcomponentswhilemakingorbreakinganysignalorACpowerconnections.
1 4 5 6 7 8 9 10 11 12
15 18 19
2 3
16 17 20
13 14
European version only
European version only
European version only
North American
version only
North American
version only
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD VISO TWO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD VISO TWO in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD VISO TWO

NAD VISO TWO User Manual - German - 34 pages

NAD VISO TWO User Manual - Dutch - 34 pages

NAD VISO TWO User Manual - French - 36 pages

NAD VISO TWO User Manual - Italian - 34 pages

NAD VISO TWO User Manual - Swedish - 34 pages

NAD VISO TWO User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info