493485
10
Zoom out
Zoom in
Previous page
1/28
Next page
IDENTIFICATI ONOFCONTROLS
REMOTE CONTROL
2
7
8
10
1
3, 4
6
9
5
12
11
USING THE VR 3 REMOTE CONTROL
The VR3 remote control handset handles the key functions of the VISO THREE. The VR3 can also be used
to directly command other NAD products that respond to applicable common remote control codes. This
includes other NAD Stereo Receiver, Integrated Amplier and Preamplier models. It has additional controls
to remotely operate NAD CD Players, AM/FM Tuners and dedicated AM/FM/DAB Tuners. It will operate up to a
distance of 23ft (7m). Alkaline batteries are recommended for maximum operating life. Two AA batteries should
be tted in the battery compartment at the rear of the Remote Control handset. When replacing batteries,
check that they have been put in the right way round, as indicated on the base of the battery compartment.
NOTE
The remote control handset supplied with the VISO THREE is of a universal NAD type, designed to
operate several NAD models. Some buttons are applicable only to specic NAD models. Contact
your dealer or NAD audio specialist for assistance.
1 ON, OFF
The VR3 remote has a separate ON and OFF button.
Press the ON button to switch the unit from Standby to operating mode. Press the OFF button
to switch the unit to Standby mode.
2 DEVICE SELECTOR
A Device Selector button determines only what component the VR3 will command; it does not
perform any function on the VISO THREE.
Press desired Device Selector button for the applicable buttons to be directed to a “page of
commands relevant to the selected device. Upon selecting a Device, you can now press the
corresponding VR3 control buttons applicable for the selected Device.
3 INPUT SELECTORS
Refer to the corresponding labels printed in the remote control faceplate and their respective
assigned buttons to make use of these functions.
Set the DEVICE SELECTOR to AMP in order to gain access to these buttons.
The input selector buttons perform the same functions as the buttons labeled the same on the
front panel.
4 NUMERIC KEYS
The numeric keys allow for direct input of tracks for CD players and direct channel/preset access for
tuners and receivers.
5 SLEEP
Switch o the NAD Receiver or Tuner after a preset number of minutes.
SLEEP MODE
The Sleep Mode timer will switch the VISO THREE to Standby mode automatically after a preset
number of minutes. Pressing the VR3’s [SLEEP] button once will display the current setting of the
sleep time mode or remaining time before the VISO THREE goes to standby mode. Pressing the
VR3’s [SLEEP] button a second time within a 3-second period will change the sleep time mode
to the next sleep time setting. Each consecutive press increases the sleep time in 30-minute
increments from 30 to 90 minutes. To cancel the sleep mode, continue pressing the VR3’s [SLEEP]
button until “Sleep O is displayed on the VFD. Switching the VISO THREE to standby mode from
either the VR3’s OFF or the VISO THREE’s Standby button will also cancel the sleep mode.
6 MUTE
Press the [MUTE] button to temporarily switch OFF the sound to the speakers and headphones.
Press MUTE again to restore sound.
MUTE mode is indicated by the Standby LED indicator ashing for NAD Integrated Ampliers or
“Mute” shown in the VFD of NAD Receivers.
Adjusting the volume level via the VR3 or the front panel volume knob will automatically
release the mute function.
7 DIM
Reduce or restore VFD brightness.
Depending on the NAD model, the brightness of the front panel display will vary when you
toggle this button.
Use with NAD VISO THREE and other compatible NAD Stereo Receiver, Tuner and CD Player
models.
10
ENGLISH PORTUGSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD VISO THREE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD VISO THREE in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD VISO THREE

NAD VISO THREE User Manual - German - 28 pages

NAD VISO THREE User Manual - Dutch - 28 pages

NAD VISO THREE User Manual - French - 28 pages

NAD VISO THREE User Manual - Italian - 28 pages

NAD VISO THREE User Manual - Portuguese - 28 pages

NAD VISO THREE User Manual - Swedish - 28 pages

NAD VISO THREE User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info