493484
7
Zoom out
Zoom in
Previous page
1/12
Next page
FIRST TIME USE
Out of the box and connecting the VISO 1 AP to the mains power source for
the rst time, the S indicator will alternately switch to green and red light
after initializing. This indicates that the VISO 1 AP is ready to be congured.
Refer to the following sections to fully enjoy and appreciate your VISO 1 AP.
SETTING UP NETWORK CONNECTION
AirPlay lets you stream music from your AirPlay-enabled device to the VISO
1 AP. The AirPlay-enabled device and the VISO 1 AP must be in the same
network to send and receive streaming audio with AirPlay.
The VISO 1 AP can be connected to a network using any of the following
methods
A Wired connection
B Wireless connection
C Share Wi-Fi setting
Start playback of your device after successful network connection using any
of the above methods.
WIRED CONNECTION
Network connection using Ethernet broadband connection. Set up a Wired
Ethernet broadband router with broadband internet connection. Your
router or home network should have a built-in DHCP server to consummate
the connection.
Using a standard straight-through Ethernet cable, connect one end of
the Ethernet cable (not supplied) to the LAN port of your wired Ethernet
broadband router and the other end to VISO 1 AP’s LAN port.
The ”S indicator will turn to solid green upon successful network
connection.
It is advisable that wired connection is utilized when possible. Wired
connection is less likely to have drop-out or range problem and not
vulnerable to interference or eavesdropping.
WIRELESS CONNECTION
Wireless (WiFi) broadband router with broadband internet connection is
required for wireless connection to be established. Wireless connection for
VISO 1 AP can be setup by the following procedure.
1 Press and hold S until it turns ashing green – this indicates it is in
Access point/setup mode already.
2 Using your iOS device (iPad is used here for reference), select among
the list of available network connections the unique network ID (NAD_
VISO1_DF601A in this example) of your VISO 1 AP.
3 Launch Safari and enter http://192.168.1.12 . The VISO 1 AP User
Interface menu window will appear. Select Prole Conguration.
4 Select your local network from the drop down SSID list (NADLAB
(WPA2 TKIP+CCMP) in this example).
NOTES
• The Status Information displays current details about your VISO 1 AP
like connection status, signal strength, rmware version and others.
If your VISO 1 AP is congured already, locate and access the TCP/IP
address of your VISO 1 AP to check Status Information.
Firmware Update is not for consumer use- this is restricted to authorized
NAD service personnel and distributors.
5 Type the WPA Passphrase (if it is password protected) of your local
network in the eld provided and then select Apply to join in.
VISO 1 AP OPERATION
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD Viso 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD Viso 1 in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD Viso 1

NAD Viso 1 Quick start guide - English - 14 pages

NAD Viso 1 User Manual - German - 12 pages

NAD Viso 1 Quick start guide - German - 14 pages

NAD Viso 1 User Manual - Dutch - 10 pages

NAD Viso 1 User Manual - French - 12 pages

NAD Viso 1 Quick start guide - French, Italian, Portuguese - 14 pages

NAD Viso 1 User Manual - Swedish - 12 pages

NAD Viso 1 Quick start guide - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info