602906
33
Zoom out
Zoom in
Previous page
1/40
Next page
2 To select other channels, toggle [ A/S ] to step through the channel list.
Release [ A/S ] when you have arrived at your desired channel. Press
[ENTER] to tune the selected channel.
• Channel and frequency are shown in the lower line of the VFD.
The number of o” display at the upper line of the VFD indicates
the signal strength level of the current channel. To improve the
reception of the selected channel, adjust or reposition the DAB
antenna until the best reception is indicated.
ooooo�����������
�5A��174.928MHz�
• If the manually tuned channel and frequency are not available, “No
Service List” will be shown in VFD.
NOTE
The number of ensembles and stations that could be scanned will vary
depending upon your location.
PRUNE LIST
There maybe situations wherein certain stations become inactive. The
“Prune list” option enables the deletion of these inactive stations in the
service list.
1 While listening to a DAB broadcast, press [TUNER MODE] button and
then [ A/S ] to select “Prune list”.
DAB�������������
<Prune�list����>
2 Press [ENTER]. Use [ A/S ] and then press [ENTER] to select between
“Cancel” or “OK? [SELECT]”. Any inactive stations (normally preceded by
a “?” mark) are automatically deleted when “OK? [SELECT]” is selected.
Otherwise, select “Cancel”.
DAB�������������
<OK?[SELECT]���>
DAB RESET
The “DAB reset option enables the re-initializing of the NAD DAB Adaptor
by going to Full Scan mode.
1 While listening to a DAB broadcast, press [TUNER MODE] button and
then [ A/S ] to select “DAB reset”. Press [ENTER].
DAB�������������
<DAB�reset�����>
2 The T 748 will initiate “DAB reset and immediately go on to “Full Scan
mode thereby enabling the T 748 to re-scan again the full range of
available DAB broadcasts.
IMPORTANT NOTICE
When “DAB reset” option is selected, all stored DAB presets will be
erased.
SETTING DAB PRESETS
The T 748 can store as many as 40 DAB stations of your favorite DAB
broadcast for immediate recall.
1 To store a DAB preset, rst tune the DAB broadcast, and then press the
AVR 4’s panel [MEMORY] button (DEVICE SELECTOR must be set TUN”).
The VFD will show “Preset Memory --”; “--” is blinking waiting for a Preset
number to be assigned.
2 Enter a Preset number in two ways
- Directly enter a number between 1 to 40 and then press [MEMORY]
button.
- Toggle [ d/f ] or [ D/F ] to step through the Preset numbers, stop at
desired number and then press [MEMORY].
Your desired DAB broadcast is now stored in the assigned preset.
DAB�������������
Preset�memory�01
3 Press [ d/f ] or [ D/F ] to step up or down between presets. Stop at
desired Preset number. Note that Presets must have been previously
stored.
DELETING A DAB PRESET
The procedure for deleting a DAB preset or all DAB Presets is the same as
that of deleting AM/FM Presets.
OPERATION
LISTENING TO DAB RADIO
33
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T748v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T748v2 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T748v2

NAD T748v2 User Manual - German - 40 pages

NAD T748v2 User Manual - Dutch - 40 pages

NAD T748v2 User Manual - French - 40 pages

NAD T748v2 User Manual - Italian - 40 pages

NAD T748v2 User Manual - Portuguese - 40 pages

NAD T748v2 User Manual - Swedish - 40 pages

NAD T748v2 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info