602906
22
Zoom out
Zoom in
Previous page
1/40
Next page
When devices that support HDMI Control (CEC) are connected, the
following modes of operation can be executed via the T 748 or the external
device using any of the device’s remote control.
Source (On/O): At “On” setting, the T 748 will automatically switch
sources if another CEC device requests a Source change.
For example, if PLAY is pressed on a BD Player with CEC, the T 748
and TV with CEC will automatically switch to their respective input
connections – the T 748 switching to the HDMI input where the BD
Player is connected while the TV will switch to its input where the
T 748’s HDMI MONITOR OUT is connected. This completes the auto-
conguration – the BD Player is automatically played back using the
T 748 and TV.
Power (On/O): At “On” setting, the T 748 will automatically go to
standby mode if it receives a CEC standby command. On the other
hand, if the T 748 receives a CEC power up command, the T 748 will
correspondingly switch ON from standby mode.
Volume (On/O): At “On” setting, the T 748 will respond to CEC volume
and mute commands.
For the above Control modes, the T 748 will not respond to any CEC
command if the particular mode is set to “O.
HDMI AUDIO OUT
Amp: HDMI Audio stream is sent to the T 748. Audio output is manifested
through the T 748’s speakers.
TV: HDMI Audio stream is sent to the TV. Audio output is manifested
through the TVs speakers.
HDMI ARC
HDMI ARC stands for HDMI Audio Return Channel. HDMI ARC function
enables an HDMI-ARC compatible TV to send audio data stream to the
T 748. Audio output is manifested through the T 748’s speakers.
• HDMI ARC is enabled only with “Volume setting set to “On. If
Volume is set to “O, HDMI ARC is automatically set to “O.
• “HDMI ARC” is shown in the VFD when it is set to “On and active.
IMPORTANT NOTES
• TheCECorHDMIARCresponseamongthedevicesmayvaryormaynot
be achieved as expected. This may depend upon the other devices’ setup
conguration, compatibility or capability.
• AudioandvideowillcontinuouslystreamfromtheHDMIsourcewith
CEC to the TV with CEC even if the T 748 is at standby mode.
LISTENING MODE SETUP
The T 748 has various listening mode options and is mostly congurable.
These are provided to reproduce a variety of sound eects depending upon
the content of the source to be played. Use a combination of [ A/S/D/F ] to
congure the following settings.
LISTENING MODES
The audio format as detected by the selected Source can be automatically
congured and processed through the following options:
DOLBY DIGITAL
Dolby Digital is the multi-channel digital signal format developed in the
Dolby laboratories. Discs bearing the Dolby Digital (double-D symbol) logo
were recorded with up to 5.1 channels of digital signals, reproducing a
much better sound quality, with dynamic and spatial sound sensations that
are much better than in the previous Dolby Surround.
A Dolby Digital audio input can be congured relative to its format as
follows
Stereo: If the detected audio is of Dolby stereo format, you can default
it to one of the following settings - Stereo, PLIIx Movie, PLIIx Music, PLIIx
Game, Neo:6 Cinema or Neo:6 Music.
Surround: If the detected audio is of Dolby Surround format, you can
default it to one of the following settings - Stereo, PLIIx Movie, PLIIx
Music, Dolby D Ex,Neo:6 Cinema or None.
None: If “None” is selected, the Dolby Digital signal will be defaulted
to the “Stereo or “Surround” settings set forth at the “PCM” option. See
discussion below about “PCM”.
DOLBY DIGITAL SURROUND MODES
The following are further descriptions of Dolby Digital surround modes.
DOLBY DIGITAL PLUS
Dolby Digital Plus is the next-generation audio technology for all high-
denition programming and media. It combines the eciency to meet
future broadcast demands with the power and exibility to realize the full
audio potential expected in the upcoming high-denition era. Built on
Dolby Digital, the multi-channel audio standard for DVD and HD broadcasts
worldwide, Dolby Digital Plus was designed for the next-generation A/V
receivers but remains fully compatible with all current A/V receivers.
Dolby Digital Plus delivers multi-channel audio programs of up to 7.1
channels and supports multiple programs in a single encoded bitstream
with the maximum bit rate potential of up to 6 Mbps and the maximum bit
rate performance of up to 3 Mbps on HD DVD and 1.7 Mbps on Blu-ray Disc.
It outputs Dolby Digital bitstreams for playback on existing Dolby Digital
systems. Dolby Digital Plus can accurately reproduce the sound originally
intended by directors and producers.
It also features multi-channel sound with discrete channel output,
interactive mixing and streaming capability in advanced systems.
Supported by High-Denition Media Interface (HDMI), a single-cable digital
connection is possible for high-denition audio and video.
OPERATION
USING THE T 748  SETUP MENU
22
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T748v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T748v2 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T748v2

NAD T748v2 User Manual - German - 40 pages

NAD T748v2 User Manual - Dutch - 40 pages

NAD T748v2 User Manual - French - 40 pages

NAD T748v2 User Manual - Italian - 40 pages

NAD T748v2 User Manual - Portuguese - 40 pages

NAD T748v2 User Manual - Swedish - 40 pages

NAD T748v2 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info