493493
35
Zoom out
Zoom in
Previous page
1/48
Next page
Until now, analogue radio signals such as FM or AM have been subject to
numerous kinds of interference on their way from the transmitter to your
radio. These problems were caused by mountains, high-rise buildings
and weather conditions. With Digital Audio Broadcast (DAB), you can now
receive CD-like quality radio programs without any annoying interference
and signal distortion. DAB broadcasts use digital signals rather than
traditional analogue transmissions, thus providing clear high quality
reception. You get far more robust reception and virtually hiss or crackle
free sound with DAB as long as you are within a good coverage area.
With DAB, the listener can scroll through a list of available stations - then
instantly tune to the station of his choice. There is no need to remember
channel frequencies. All broadcasts are selected by simply selecting the
service name.
The T 787 makes it possible for you to enjoy listening to DAB broadcasts.
The T 787 has a Digital Audio Broadcast (DAB) module socket on the rear
panel for adding a separately sold and NAD-specied outboard DAB
module - the NAD DAB Adaptor DB 1 or the DAB+ NAD DAB Adaptor
DB 2. All the control software for this format is included; just plug-in the
module and start enjoying the CD-like quality sound and expansive content
selection available with DAB.
IMPORTANT NOTES
The T 787 is compatible only with the NAD DAB Adaptor module models
DB 1 or DB 2.
When using the HTR 8 remote control to carry out DAB commands,
ensure that the DEVICE SELECTOR is set to “TUNER”.
In the DAB discussions below, all control buttons mentioned are with
reference to the HTR 8 remote control.
CONNECTING THE DAB MODULE
Plug-in the other end of the DIN connector (supplied with your NAD DAB
Adaptor DB) from the DAB module’s output port into the corresponding
DAB module input socket on the rear panel of the T 787. Select DAB mode
on the T 787 by toggling HTR 8’s [AM/FM/DB] button.
NOTES
The NAD DAB Adaptor (DB 1 or DB 2) is not supplied with your T 787.
Refer to the installation diagram printed on the carton box of the NAD
DAB Adaptor for guidance on how to connect the NAD DAB Adaptor to
the T 787.
If there is no NAD DAB Adaptor connected, the VFD will show “Check
DAB Tuner.
DAB OPERATION
With the separately sold NAD DAB Adaptor already connected to the T 787,
you can now carry out the T 787 to receive DAB broadcasts.
1 Toggle [AM/FM/DB] button until DAB mode. The VFD will show “No
Service List” indicating that there are no scanned DAB broadcast
services yet. This is the default mode of the NAD DAB Adaptor.
DAB P--
No Service List
2 To tune to DAB broadcast services, press [TUNER MODE] and then
toggle [ A/S ] to select either “Full Scan” or “Local Scan.
FULL SCAN will enable the scanning of the full range of digital
frequencies (Band III and L-Band).
LOCAL SCAN performs local scanning of available DAB services in your
area. Check with your dealer or visit www.WorldDAB.org to check the
applicable digital transmission frequencies in your area.
3 Upon selecting either “Full Scan or “Local Scan, automatic scanning
will be performed. This sequence cannot be interrupted. During the
sequence, the following message will be visible in the VFD.
The bars show the progress of the sequence. When scanning is
completed, the last number shown on the right side of the VFD
corresponds to the total number of DAB broadcast stations found. Then,
the rst station is tuned in (See ALPHANUMERIC section below to
understand the order or arrangement of stations).
Scanning... 19
||||||||||||
OPERATION
LISTENING TO DAB RADIO
35
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 787 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 787 in the language / languages: English as an attachment in your email.

The manual is 7,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 787

NAD T 787 User Manual - German - 48 pages

NAD T 787 User Manual - Dutch - 48 pages

NAD T 787 User Manual - French - 48 pages

NAD T 787 User Manual - Italian - 48 pages

NAD T 787 User Manual - Swedish - 48 pages

NAD T 787 User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info