602918
21
Zoom out
Zoom in
Previous page
1/52
Next page
A/V PRESET
A particular Source can be assigned a stored Preset. The parameters set up
in the selected Preset number will be adopted into the particular Source it
is assigned (Please refer to the separate section on A/V Presets for further
understanding of Preset settings).
Scrolling to A/V Preset’ and by pressing and then keys, a Source
could be assigned a Preset number ranging from Preset 1 to 5.
If it is desired not to assign the particular Source a Preset setting, select
‘None’.
TRIGGER OUT
The Trigger Out for a particular Source is dependent on the congurations
done in a separate menu on Trigger Setup (See Trigger Setup below). If all
three available Trigger outputs are assigned to ‘Source Setup in the separate
Trigger Setup window, a particular Source can have the following Trigger Out
combinations
Trigger Out 1 2 1 + 2 3 1 + 3 2 + 3 1+2+ 3
These combinations are dependent on the assignment of ‘Source Setup for
Trigger 1 Out, Trigger 2 Out or Trigger 3 Out’ at the Trigger Setup menu.
Another option is ‘None’ whereby the particular Source is not assigned any
Trigger Out.
For Trigger Out’ to become enabled and assignable at ‘Source Setup
(Normal View)’ menu, make sure to carry out or note the following
beforehand
• In the separate Trigger Setup menu, assign Trigger 1 Out, Trigger 2 Out
or Trigger 3 Out’ to ‘Source Setup.
• Trigger Out’ will not appear as an option at the Source Setup (Normal
View) menu if at the separate Trigger Setup’ menu, Trigger 1 Out,
Trigger 2 Out or Trigger 3 Out’ are all assigned to ‘Main, Zone 2, Zone 3,
Zone 4, or Zone 2+3+4’; with not even one Trigger Out port allocated
to ‘Source Setup.
SOURCE SETUP (TABLE VIEW)
The Source Setup (Table View) reects the settings made in the Source
Setup (Normal View) menu. All the Source settings are summarized and
displayed in tabulated form in the Source Setup (Table View).
Navigating through the Source Setup (Table View) via a combination of
and then keys, one will have the benet of directly changing the
settings for Audio, Video, Preset, Trigger and Source Name without going
back to the Source Setup (Normal View) menu.
iPod SETUP
The iPod Setup menu allows you to preset the following associated settings
when iPod is the selected source:
Enabled : Select Yes’ to enable iPod as a Source or ‘No to disable it.
Auto Connect : Select Yes’ to automatically enable and connect the
iPod player docked in the linked NAD iPod docking station when Source
5 (the default iPod source allocation in the T 785) is selected. Select ‘No
if you do not want for the iPod connection automatically connected.
Menu Timeout : Set the time for the OSD to revert to the ‘Now
Playing display when the iPod menu has been left idle (no scrolling or
navigation being done) for the specied time out time. For the ‘Now
Playing OSD to be shown, there should be a song paused or being
played before going to the iPod menu. You can set the ‘Menu Timeout’
between the range 5s to 60s at 5s increments. If you do not want for
the menu to timeout, select ‘O.
SPEAKER SETUP
After connecting all ancillary sources and other combinations, the Speaker
Setup menu will guide you on how to manage and setup your speakers in
order to achieve optimum sound acoustics in your listening environment.
The following are the Speaker Setup Menu sections.
OPERATION
USING THE T 785  SETUP MENU
21
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 785 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 785 in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 785

NAD T 785 User Manual - German - 52 pages

NAD T 785 User Manual - Dutch - 52 pages

NAD T 785 User Manual - French - 52 pages

NAD T 785 User Manual - Italian - 52 pages

NAD T 785 User Manual - Swedish - 50 pages

NAD T 785 User Manual - Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info