493494
40
Zoom out
Zoom in
Previous page
1/48
Next page
OVERVIEW OF THE HTR 8
Controls up to 8 devices.
Learns up to 360 commands.
Records up to 52 macros with a maximum of 64 commands each.
Congurable punch-through.
Key illumination with programmable timeout.
Upgradable.
Contains pre-programmed library of NAD remote codes.
The NAD HTR 8 is ready to operate the T777 right out of the box, but it is really eight remotes in one.
Each of the 8 DEVICE SELECTOR keys at the top of the handset can call up a new “page of remote
control codes to be transmitted by the remaining keys. You may “teach codes from any infrared-
remote controlled component, regardless of brand, to any or all of these.
Obviously, the most logical system is that you teach the codes from your DVD player to the [DVD]
DEVICE SELECTOR page, your television’s codes to the [TV] “page and so on, but there is no required
scheme: You may load any commands to any key on any page (see “LEARNING CODES FROM OTHER
REMOTES below).
The HTR 8 is already pre-programmed with a full complement of T777 commands on its [AMP] DEVICE
SELECTOR page, and as well as with library commands to operate most NAD-brand DVD, BD, CD or
TUNER components on the corresponding DEVICE SELECTOR pages”. These default commands are
permanent: Even if you teach the HTR 8 new commands to take their place, the underlying library
commands remain in place and can easily be recalled should you add an NAD component to your
system later (see “DELETE MODE” below).
GETTING FAMILIAR WITH THE HTR 8
The HTR 8 is divided into two main sections. Eight DEVICE SELECTOR keys at the top—[AMP], [DVD,]
[TV,] and so on - set the handset’s remaining keys to a “page of commands to control a particular
component. A DEVICE SELECTOR key determines only what component the HTR 8 will command; it
does not perform any function on the component. All the remaining keys are function keys that can
“learn” control codes from virtually any infrared remote controller, allowing you to teach the codes of
your equipment, regardless of brand, to the HTR 8.
However, the HTR 8 is already pre-programmed to operate the T777. All of the function keys on the
[AMP] Device Selector “page perform T777 functions. The HTR 8 can also command many other NAD
components from its [DVD], [CD], [BD] and [TUNER] pages.
It is important to note that certain HTR 8 keys perform dierent functions depending on the selected
DEVICE SELECTOR page”. The colour of the DEVICE SELECTOR key-labelling corresponds to the
labelling of the function keys. Most centrally, the black [AMP] DEVICE SELECTOR “page corresponds to
the black keys: When the HTR 8’s [AMP] DEVICE SELECTOR page is active; these keys select the amplier
or receiver inputs. Similarly, the purple [DVD] DEVICE SELECTOR page” corresponds to several purple
labels and so on.
LEARNING CODES FROM OTHER REMOTES
Begin by positioning the HTR 8 nose-to-nose” with the source remote so the two devices’ infrared
windows are about 2 inches apart.
Enter Learning Mode: On the HTR 8, simultaneously press-and-hold for 3 seconds both a DEVICE
SELECTOR key and the [RES] key until the Learn LED of the HTR 8 turns steady green.
Press the HTR 8’s function key you wish to teach a command; the Learn LED will turn amber.
Press-and-hold the function key on the source remote: The HTR 8’s Learn LED will icker amber for
a second or two, then turn solid green. The command is learned.
Press the HTR 8’s DEVICE SELECTOR key again to exit the learning mode.
If the Learn LED does not icker amber you may need to vary the distance between the remotes. If
the Learn LED turns red rather than green, that particular command of that source remote command
could not be learned. In rare instances, there maybe some IR format that is not compatible with the
HTR 8.
OPERATION
USING THE HTR 8 REMOTE CONTROL
/
/
/
40
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 777 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 777

NAD T 777 User Manual - German - 48 pages

NAD T 777 User Manual - Dutch - 48 pages

NAD T 777 User Manual - French - 50 pages

NAD T 777 User Manual - Italian - 48 pages

NAD T 777 User Manual - Swedish - 48 pages

NAD T 777 User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info