745046
10
Zoom out
Zoom in
Previous page
1/42
Next page
14 AUDIO PRE-OUT
The AUDIO PRE- OUT makes it possible to use the T 758 as a pre-
amplier to external power ampliers for some or all channels.
Connect FRONT L, FRONT R, CENTER, SURR R, SURR L, SURR-BL and
SURR-BR to the respective channel input of a power amplier or
ampliers driving the corresponding applicable speakers.
Unlike the full range channels, there is no power amplier built-into
the T 758 for a subwoofer. Connect the SUBW output to powered
(“active”) subwoofers or to power amplier channels driving a
passive system.
ZONE 2
SURR-BL and SURR-BR are also assigned as secondary ZONE 2 OUT.
This is applicable only if “Zone 2” is the selected setting of “Back
Amp in the Amplier Setup” menu. For further information, refer
to the item about ZONE CONTROLS at the USING THE T 758 - MAIN
MENU segment of the OPERATION section.
Refer also to the item about ZONE 2 AT AUDIO PRE-OUT SURROUND
BACK in the ZONE CONTROLS segment of the OPERATION - USING
THE T 758 - MAIN MENU section.
NOTE
Never connect both the external amplier and T 758’s speaker outputs to
the same set of speakers.
15 ZONE 2
Send zone selected audio source to the corresponding audio input
of a separately located additional amplier or receiver (not supplied)
that can power its matching set of speakers.
Use high quality patch cables to reduce noise pickup over long
distance runs.
16 COMPONENT VIDEO INPUT 1-3, COMPONENT VIDEO MONITOR OUT
Connect the Component Video Input to Component Video output
of compatible source components, typically a DVD player, BD
player, digital cable box or other applicable components. Connect
Component Video Monitor Out to the Component Video input of a
compatible video monitor/TV.
Be sure to observe consistency in connecting the Y/Pb/Pr jacks
to the corresponding sources/inputs. The routing of the three
component video input is fully congurable via the Source Setup
item of the Setup Menu OSD.
The T 758’s sets of component video input and output are fully
wideband and compatible with allowable HDTV formats.
17 SPEAKERS
Connect the respective speakers FRONT L, FRONT R, CENTER,
SURR R, SURR L, SURR-BACK L, and SURR-BACK R channels to their
corresponding loudspeakers. Make sure the “+” (red) terminal and
“-” (black) terminal are connected to the corresponding “+” and “-”
terminals of the loudspeaker. Use extra care to ensure that no stray
wires or strands cross between posts or terminals at either end.
SURR-BACK L and SURR-BACK R can be assigned as Zone 2 speaker
level output. This is applicable only if “Zone 2” is the selected setting
of “Back Amp in the Amplier Setup menu. For further information,
refer to the item about ZONE CONTROLS at the USING THE T 758 -
MAIN MENU segment of the OPERATION section.
IDENTIFICATION OF CONTROLS
REAR PANEL
10
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 758 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 758 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 758

NAD T 758 User Manual - German - 42 pages

NAD T 758 User Manual - Dutch - 42 pages

NAD T 758 User Manual - French - 44 pages

NAD T 758 User Manual - Swedish - 42 pages

NAD T 758 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info