493495
18
Zoom out
Zoom in
Previous page
1/44
Next page
DSP OPTIONS
LIP SYNC DELAY
DSP Options has the feature “Lip Sync Delay” whose function is to match
any delay that may occur in the picture relative to the audio.
By varying “Lip Sync Delay from 0ms to 120ms, one can delay the audio
output in order to synchronize it with the video image.
TONE CONTROLS
The T 757 has two Tone Control levels – Treble and Bass. Bass and Treble
controls only aect the low bass and high treble leaving the critical
midrange frequencies free of coloration.
These controls allow one to tweak on-the-y, the frequency response
of the source during playback. The control setting could be adjusted by
navigating through the Tone Controls OSD menu via a combination of
[ENTER] and [ A/S/D/F ] keys.
Maximum and minimum values for all three Tone Control levels are ±10 dB.
Tone Defeat” gives one the choice of varying or completely bypassing
the tone control section of the T 757. If “O (“Tone Active” in the VFD) is
selected, the Tone Control circuits are active.
Select “On” (“Tone Defeat” in the VFD) to bypass the Tone Controls eectively
defeating the eect of the tone control circuits.
ZONE CONTROLS
Depending on the settings made at the separate “Zone Setup menu
under the “Setup Menu” section discussion, Zone 2 can be congured and
managed via this “Zone Controls” window.
Select “On” to activate Zone 2. When activated, the Source input for Zone
2 can be allocated by selecting through the following inputs – All enabled
Sources, Front Input, Media Player, Tuner and Local.
As long as the associated Source input is active, it will continuously be
available at ZONE 2 output port in the rear panel regardless of the Main
Zone settings. For example, while the T 757 is at Source 1 mode, you can
set the Zone 2 Controls “Source item to “Source 3”; the active Source 3’s
audio output will be directed to ZONE 2 output port in the rear panel even
though the T 757 is at Source 1 mode.
You can then feed the ZONE 2 jacks to another amplier or receiver
that maybe located in another area of your home or building. With your
separate amplier or receiver selecting the fed signal and with speakers
connected, you can then enjoy the zone selected source’s audio signal.
Select “Local” as your selected Zone 2 Source input if you wish to enjoy the
same source as the main Zone and allow simultaneous listening, but with
full separate volume levels.
If a Zone 2 is set to “O, it is deactivated or powered o.
IMPORTANT NOTICE
Only analog audio connected through a Sources analog audio input
port can be associated as audio source for Zone 2. Digital audio sources
connected via HDMI, digital optical and digital coaxial input ports
cannot be downmixed and used as Zone 2 audio source. Ensure also
that the associated Source’s Digital Audio setting is set to “O” or no
actual digital source is connected.
VOLUME
Volume refers to the adjustable secondary Zone 2 Volume level that can
be increased or decreased depending upon its settings. This is applicable
only if the Zone 2 Volume setting in the separate “Zone Setup menu under
“Setup Menu” is set to Variable. If set to “Fixed”, this “Volume item at the
Zone Controls section will not be available.
NOTES
• IfZone2isstillONandSTANDBYbuttonispressedtoswitchtheT757
to standby mode, the VFD will be extinguished but the STANDBY LED
remains illuminated blue. This indicates that Zone 2 is still active. In
order to completely shut down the T 757 together with Zone 2, press and
hold STANDBY button until the STANDBY LED turns amber.
• Zone2isaudioonlyandnotassociatedwithanyvideoinputsources.
OPERATION
USING THE T 757  MAIN MENU
18
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 757 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 757 in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 757

NAD T 757 User Manual - German - 44 pages

NAD T 757 User Manual - Dutch - 44 pages

NAD T 757 User Manual - French - 44 pages

NAD T 757 User Manual - Italian - 44 pages

NAD T 757 User Manual - Portuguese - 44 pages

NAD T 757 User Manual - Swedish - 44 pages

NAD T 757 User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info