493497
27
Zoom out
Zoom in
Previous page
1/42
Next page
AMPLIFIER SETUP
If the surround back speakers are not used in the main zone, their surround
back amplier channels could be assigned for Main Back, Zone 2 or Bi-Amp.
The Surround Back amplier is congurable through the following settings
• Main Back: Assign as surround back speakers.
• Zone 2: Assign the surround back amplier channels to supply Zone 2
speaker level outputs from the surround back speaker terminals.
• Bi-Amp: Provide a bi-amp mode for the Main Front speakers (Left
and Right) speakers thus reproducing the Front Left and Front Right
amplier channel outputs.
IMPORTANT NOTICE
If “Back Amp” is set to Zone 2 or Bi-amp, it is not possible to select “7.1” in the
Auto Calibration menu since the surround back speakers are eectively not
included in the conguration anymore. Only “5.1” is selectable at this condition.
TRIGGER SETUP
The T 747 features a congurable +12V DC Trigger Output that can be used
to activate a component or system it is fed into.
TRIGGER OUT
Triggers are low voltage signals used to turn on/o other compliant
devices. There are three choices where +12V DC output can be assigned
and these are – Main, Zone 2 and Source Setup.
Main: +12V DC is available at the assigned Trigger Out when the T 747
is at powered state.
Zone 2: When the Zone 2 is at powered state, +12V DC is available at
Trigger Out.
Source Setup: If Trigger Output is linked to “Source Setup”, +12V DC
is available at Trigger Out whenever the particularly assigned Source is
selected.
DELAY
The availability of +12V DC at Trigger OUT can be regulated. If it is desired
that +12V DC is available without delay the moment Trigger OUT is linked
to its assigned setting, set Delay to 0s. Otherwise, one can select through a
delay time of 1s to 15s.
LISTENING MODE SETUP
The T 747 has various listening mode options and is mostly congurable.
These are provided to reproduce a variety of sound eects depending
upon the content of the source to be played.
LISTENING MODE
The audio format as detected by the selected Source can be automatically
congured and processed through the following options:
Dolby Digital
Dolby Digital is the multi-channel digital signal format developed in the
Dolby laboratories. Discs bearing the double-D symbol were recorded with
up to 5.1 channels of digital signals, reproducing a much better sound
quality, with dynamic and spatial sound sensations that are much better
than in the previous Dolby Surround.
A Dolby Digital audio input can be congured relative to its format.
2 Channel: If the detected audio is a 2 Channel Dolby Digital signal,
you can default it to one of the following settings – PLIIx Movie, PLIIx
Music, DVS Wide, DVS Reference or None.
Surround: If the detected audio is a Surround Dolby Digital signal, you can
default it to one of the following settings –Dolby Digital EX, PLIIx Movie,
PLIIx Music, DVS Wide, DVS Reference, Stereo Downmix or None.
None: If “None” is selected, the Dolby Digital format will follow the
“Digital” setting set forth at “Other option under this menu section. See
discussion below about “OTHER”.
OPERATION
USING THE T 747  SETUP MENU
27
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 747 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 747 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 747

NAD T 747 User Manual - German - 42 pages

NAD T 747 User Manual - Dutch - 42 pages

NAD T 747 User Manual - French - 46 pages

NAD T 747 User Manual - Italian - 42 pages

NAD T 747 User Manual - Swedish - 42 pages

NAD T 747 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info