493497

NAD T 747 Manual

22
Zoom out
Zoom in
Previous page
1/42
Next page
Source
The T 747 is equipped with ten congurable Sources (Source 1 -10). The
settings for each Source are dependent on the congurations set forth in
the parameters for that particular Source window.
While at “Source” line item, use [ ] keys to toggle through the Sources.
NOTE
Source 4 is defaulted to iPod. For Source 4 to be changed and assigned
to other inputs, go to “iPod Setup” menu under the “Source Setup” menu.
At iPod Setup menu, set “Enabled” to “No” – you can now assign Source 4
to other inputs or settings as desired.
Enable
One can enable/disable a Source via this option. This is particularly useful
if only few Sources are used and one directly selects the Source from the
front panel, bypassing unused sources.
To enable or disable a particular Source, scroll to “Enable”, press [ ] and
then [ ] to select “Yes” or “No”.
Name
A new Name maybe assigned to a Source label. For example, if your DVD player
is attached to “Source 1”, it is possible to rename “Source 1” to “DVD”.
In order to rename the Source label, scroll to “Name”, press [ ] and then [ ]
to pick and select through the alphanumeric selections.
Press [ ] to move to the next character or back to the previous
character, and at the same time save the changes done on the current
character. The name can be as long as eight characters.
The new Name will be shown in the VFD as well as on the OSD.
Analog Audio
The T 747 has nine analog audio inputs including 7.1 input. These analog
inputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, 7.1 Input,
Audio Front and Audio MP can be variably assigned to each Source.
Scroll to “Analog Audio”, press [ ] and then [ ] to select and assign an
analog audio input to the particular Source. If “O” is selected, no incoming
analog audio signal is selected by the particular Source.
NOTE
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
“O” at the “Digital Audio” setting of the same “Source” menu.
Gain
Gain adjustment allows all sources to play back at the same volume so you
don’t need to adjust the volume every time a new source is selected. It is
generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to “Gain”, press [ ] and then [ ] to step through the desired level
from -12dB to 12dB.
Digital Audio
To take advantage of the T 747’s high performance surround and digital
audio circuitry, it is advisable that its Digital Audio inputs are selected.
There are ten Digital Audio inputs selectable for the T 747. They are the
following:
• HDMI 1, HDMI 2, HDMI 3, HDMI 4
• Optical 1, Optical 2, Optical Front
• Coaxial 1, Coaxial 2
Another option is “O” whereby no incoming digital audio signal is selected
by the particular Source.
NOTE
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
“O” at the “Digital Audio” setting of the same “Source” menu.
Video
A specic video input can be assigned a particular Source. The following are
the assignable Video inputs:
• HDMI 1, HDMI 2, HDMI 3, HDMI 4
• Component 1, Component 2, Component 3
• S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video Front
• Composite 1, Composite 2, Composite 3, Composite 4,
Composite Front
Another option is “O” wherein the particular Source is prompted not to
select any Video input.
A/V Presets
A particular Source can be assigned a stored Preset. The parameters set up
in the selected Preset number will be adopted into the particular Source it
is assigned (Please refer to the separate section on “A/V PRESETS” above for
further understanding of Preset settings).
Scrolling to “A/V Presets” and by pressing [ ] and then [ ] keys, a
Source could be assigned a Preset number ranging from Preset 1 to 5.
If it is desired not to assign the particular Source a Preset setting, select
“None”.
Trigger Out
The Trigger Out for a particular Source is dependent on the congurations
done in a separate menu on Trigger Setup (See “TRIGGER SETUP” below). If
Trigger output is assigned to “Source Setup” in the separate “Trigger Setup”
menu window, +12V will be available at +12V TRIGGER OUT port whenever
a Source with “Trigger Out” set to “Yes” is recalled.
Another option is “None” whereby the particular Source is not assigned any
Trigger Out.
OPERATION
USING THE T 747  SETUP MENU
22
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 747 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 747 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 747

NAD T 747 User Manual - German - 42 pages

NAD T 747 User Manual - Dutch - 42 pages

NAD T 747 User Manual - French - 46 pages

NAD T 747 User Manual - Italian - 42 pages

NAD T 747 User Manual - Swedish - 42 pages

NAD T 747 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info