Manual NAD T 567 (page 16 of 30) (English)

493500

Zoom out

Zoom in

1/30

2 A menu prompts you to select “Yes” to reset any existing connection

or “No” to retain current connection. Select “Yes”. Use [A/S/D/F] to

congure your connection with below OSD.

Static: Select to set manually the IP address, Subnet Mask, Gateway and

consequently the DNS Server settings.

Dynamic: Select to automatically allocate an IP address.

3 After selecting either “Static” or “Dynamic”, click “OK” to complete the

network connection.

4 After setting up the connection, a menu will prompt you test your

network connection. Click “OK” to complete the network connection

and exit the “Connection Setting” menu.

5 If “Test” is selected, the network connection status is displayed as in below

WIRELESS NETWORK

Another connection option is to use an Access Point or a wireless router.

The network conguration and connection method may vary depending

upon the equipment used and the network environment.

The T 567 is equipped with an IEEE 802.11n wireless module, which also

supports the 802.11a/b/g standard. For the best wireless performance, it is

recommended that an IEEE 802.11n certied Wi-Fi network (access point or

wireless router) is used. For detailed connection steps and network settings,

refer to the setup instructions supplied with your access point or wireless router.

1 Select “Wireless” from the “Connection Setting” menu.

2 A menu prompts you to select “Yes” to reset any existing connection

or “No” to retain current connection. Select “Yes”. Use [A/S/D/F] to

congure your connection with below OSD.

Manual: The AP name (SSID) of your access point may not be

broadcasting. Check your router settings through your computer and

either set your router to broadcast SSID, or manually enter the AP name

(SSID). Follow the consequent OSD prompt sequence and enter the

necessary information or congurations.

Push Button: Select if your access point or wireless router supports

Push Button Conguration method. Within 2 minutes upon selecting

“Push Button”, press the Push Button on your access point or wireless

router. You do not need to know the AP name (SSID) and security code

of your access point or wireless router.

3 Follow the same steps 2-5 of the above WIRED NETWORK procedure to

complete your wireless network connection settings.

IMPORTANT NOTICE

You can also directly select an Access point name or SSID from the list that is

shown after Step 2 above. For example, use [D/F] to select “NADLAB”. Press

[ENTER]. After selecting, you will be redirected to another window where you

are to type a password or access point name.

OPERATION

USING THE T 567

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 567 in the language / languages: English as an attachment in your email.

The manual is 6,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 567

NAD T 567 User Manual - German - 30 pages

NAD T 567 User Manual - Dutch - 30 pages

NAD T 567 User Manual - French - 30 pages

NAD T 567 User Manual - Italian - 30 pages

NAD T 567 User Manual - Portuguese - 30 pages

NAD T 567 User Manual - Swedish - 30 pages

NAD T 567 User Manual - Spanish - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NAD T 567 Manual

Product: