493500
6
Zoom out
Zoom in
Previous page
1/30
Next page
INTRODUCTION
GETTING STARTED
UNPACKING AND SETUP
WHAT’S IN THE BOX
Packed with your T 567 you will nd:
The BR 2 remote control with 2 (two) AA batteries
A detachable AC power cord
Set of rubber feet
This owner’s manual version in CD-ROM
SAVE THE PACKAGING
Please save the box and all of the packaging in which your T 567 arrived.
Should you move or otherwise need to transport your T 567, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 23 feet/7
meters, between the T 567’s front panel and your primary listening/viewing
position. This will ensure reliable infrared remote control communications.
The T 567 generates a modest amount of heat, but nothing that should
trouble adjacent components. It is perfectly possible to stack the T 567 on
top of other components.
DISC LOADING AND PLAYBACK
There are two dierent disc sizes. Place the disc in the correct guide on the
disc tray. If the disc is out of the guide, it may damage the disc and cause
the T 567 to malfunction. “Disc Error” appears at the On-Screen Display
(OSD) (“ERROR” at the VFD), if the disc is placed upside down (and it is a
single sided disc).
The following are important tips when loading a disc:
• Do not push the disc tray while it is moving. Doing so may cause the
T 567 to malfunction.
• Do not push up the disc tray or put any objects other than discs on the
disc tray. Doing so may cause the T 567 to malfunction.
• Keep your ngers well clear of the disc tray as it is closing. Be especially
careful with childrens ngers around the closing disc tray, as there is a
risk of personal injury.
Press [4] (Play), the disc tray is automatically closed. Playback of the rst
track starts if a CD is loaded. For BD, DVD, USB or other disc media, playback
operation is accessible through their menu screen.
NOTE
Do not move the T 567 during playback. Doing so may damage the disc
and the T 567.
ASSEMBLY OF RUBBER FOOT WITH PLASTIC FOOT
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD T 567, we provide the following “Quick Start” instructions to get you
underway.
Please make all the connections to your T 567 with the unit unplugged. It is
also advisable to power-down or unplug all associated components while
making or breaking any signal or AC power connections.
PLAY A BLU-RAY DISC
1 Using a compatible HDMI connector, connect the T 567’s HDMI OUT to
the corresponding HDMI input of your HDMI-compatible TV/monitor.
2 Connect the supplied AC cord to the T 567 AC mains input and then
plug into an AC outlet. Follow the same for your HDMI-compatible TV
as applicable. Switch ON your TV and set it to the HDMI input where the
T 567 is connected.
3 Press the [OPEN/CLOSE] button to switch ON the T 567 and at the same
time open the disc tray.
4 Load the Blu-ray disc in the disc tray.
5 Press the front panel [PLAY/PAUSE] button or [4] (Play) button of
BR 2 remote control to close the disc tray. Depending upon the disc,
playback may commence immediately or you may have to click “Movie”
icon in the “Home Menu” (refer to T 567 default menu screen).
Enjoy the movie but be sure to set aside time to read this manual
thoroughly to set up and congure your T 567 according to your
preference.
Step 1
Insert rubber foot
Squeeze to allow the
rubber foot to clamp under
the six flanges on the
plastic foot
Plastic foot flange
Step 2
Rubber foot inserted
6
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 567 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 567 in the language / languages: English as an attachment in your email.

The manual is 6,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 567

NAD T 567 User Manual - German - 30 pages

NAD T 567 User Manual - Dutch - 30 pages

NAD T 567 User Manual - French - 30 pages

NAD T 567 User Manual - Italian - 30 pages

NAD T 567 User Manual - Portuguese - 30 pages

NAD T 567 User Manual - Swedish - 30 pages

NAD T 567 User Manual - Spanish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info