562260
6
Zoom out
Zoom in
Previous page
1/10
Next page
REAR PANEL CONNECTIONS
4 USB
• Connect to USB 2 port of the M50 Digital Music Player using the
supplied USB A to USB B connector.
• Loaded CD in the M50 will be ripped automatically to the M52.
5 POWER
• Supply the AC mains power to the M52.
• When the POWER switch is set to ON position, the M52 goes to
standby mode as shown by the amber status condition of the
Standby LED. Press the front panel Standby button to switch ON the
M52 from standby mode.
• If you intend not to use the M52 for long periods of time (such as
when on vacation), switch o the POWER switch.
• With POWER switched o, the front panel Standby button cannot
activate the M52.
6 FUSE HOLDER
• Only NAD service personnel can access the fuse holder in the
unlikely event a fuse may need to be replaced. Refer all servicing to
authorized NAD service centers.
7 AC MAINS INPUT
• The M52 comes supplied with two separate AC power cords. Select
the AC power cord appropriate for your region.
• Before connecting the AC power cord’s plug to the mains power
source, ensure rst that the other end of the AC power cord is rmly
connected to M52’s AC Mains input socket.
• Always disconnect the AC power cord’s plug from the mains power
source rst, before disconnecting the other end of cable from the
M52’s AC Mains input socket.
FRONT PANEL CONTROLS
1 STANDBY BUTTON
• With the AC power cord’s plug connected to the mains power
source and the other end of the AC power cord rmly connected
to M52’s AC Mains input socket, switch ON the rear panel POWER
switch for the Standby button to activate. The Standby LED indicator
will turn from amber to blue.
• Pressing the STANDBY button again turns the unit back to standby
mode.
2 STANDBY LED
• This indicator will light up amber upon switching ON the rear panel
POWER switch.
• When the front panel Standby button is pressed to power up the
M52 from standby mode, this indicator will illuminate blue.
3 HARD DISC DRIVE (HDD) LED INDICATORS
• Display the status of the three hard disc drives (HDD). The HDD
LEDs will be in blue color if they are all healthy and active.
• If a disc drive fails, data will not be lost in this self-healing system.
Simply replace the drive and the system automatically recongures
itself.
• The color of HDD LEDs remains in red if M52 is not connected to
a M50. If the HDD LEDs remained in red after connection, it may
indicate that a disk drive(s) is missing; if ashing red, there maybe
disk drive failure. Refer all servicing to authorized NAD service
centers.
IDENTIFICATION OF CONTROLS
digital music vaultM52
hdd 1 hdd 2 hdd 3
© NAD M52
1 2 3
© NAD M52
USB
ON
POWER
100-240V ~ 50/60Hz
4 5 6 7
6
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M52 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info