562259
10
Zoom out
Zoom in
Previous page
1/30
Next page
1 AES/EBU OUT
Connect AES/EBU OUT to corresponding AES/EBU IN of compatible
devices (like the NAD M2 or NAD M51) to stream digital audio content.
For high-end sources with higher sampling rates like 176kHz and
192kHz, it is highly recommended that this AES/EBU OUT be interfaced
with the AES/EBU IN connector. Such interface is well suited to handle
such sources with high sampling rate.
2 COAXIAL OUT, OPTICAL OUT
Connect COAXIAL OUT or OPTICAL OUT to corresponding digital audio
input of compatible devices such receivers, computer soundcard or
other digital processors.
3 USB 1 (TYPE B)
Use for servicing purposes only. Not for consumer use. Only authorized
NAD service personnel can access this USB port.
4 HDMI OUT
Connect HDMI OUT to compatible devices with HDMI input. This is not
video output. It output audio component only and supports 24/192 HD
Audio in PCM’s native I2S format.
5 USB 2 (TYPE A)
USB 2 is the corresponding USB input for M52 Digital Music Vault
connection.
A USB mass storage device with music les can also be connected
to USB 2. Typical USB mass storage devices compatible with M50
include portable flash memory devices and external hard drives
(NTFS, EXT4 formatted).
When a USB mass storage device is connected to this port, a “Music”
folder will be automatically created on the USB device. Put all your
music les in this “Music” folder, connect it to M50’s USB 2 and then
re-index – this “Music folder is now your “Library where all songs
are stored or ripped.
6 ETHERNET/LAN
LAN connection must be setup for wired connection to be established.
Set up a Wired Ethernet broadband router with broadband internet
connection. Your router or home network should have a built-in DHCP
server to consummate the connection.
Using a standard straight-through Ethernet cable (not supplied),
connect one end of the Ethernet cable to the LAN port of your
wired Ethernet broadband router and the other end to M50’s LAN
port.
7 RS232
Use a RS232 serial cable (not supplied) with RS232 adapter (if necessary)
to interface this port to the corresponding RS232 connector of the
optional M2, M51, C390DD or any compatible NAD models. Through
this RS232 connection, the VOLUME slider in the App can be adjusted to
increase or decrease the audio output level of the M50.
NOTE
Use a NULL modem cable or cross serial RS232 gender changer adapter
to interface the M50 with the compatible NAD model.
8 IR IN, IR OUT
These mini-jacks accept and output remote-controlled codes in
electrical format, using industry-standard protocols, for use with “IR-
repeater” and multi-room systems and related technologies.
All NAD products with IR IN/IR OUT features are fully compatible
with M50. For non-NAD models, please check with your other
product’s service specialists as to their compatibility to the M50’s IR
features.
IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another compatible device to
allow control of the M50 from a remote location.
IR OUT
Connect IR OUT to the IR IN jack of a compatible device. Command
and control the linked compatible device by directing its own remote
control to M50’s infrared receiver.
IDENTIFICATION OF CONTROLS
© NAD M50
100-240V 50/60Hz
POWER
ON
DIGIT AUDIO
COAXIAL
OUT
OPTICAL
OUT
USB 1 USB 2
AES/EBU OUT
HDMI
OUT
AL
ETHERNET
RS232
WIFI
+12V TRIGGERIR
IN
IN
OUTOUT
4 5 6 7 8 9 10 11 12 131 2 3
REAR PANEL
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M50 in the language / languages: English as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M50

NAD M50 Quick start guide - English - 2 pages

NAD M50 User Manual - German - 26 pages

NAD M50 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info