745037
20
Zoom out
Zoom in
Previous page
1/26
Next page
ENGLISH
20
LOADING CODE-LIBRARIES
The HTRM 2 can store a dierent library of default NAD codes for each of
its Device Selector “pages. If the original default library does not control
your NAD CD player, BD player, or other component, follow the procedure
below to change the code-library.
1 Begin by ensuring that the component you wish the HTRM 2 to control
is plugged in and powered-up (“on, not merely in standby).
2 To enter the HTRM 2s Library Mode, simultaneously press-and-hold
both the desired Device Selector key and the [A/V PSET] key for 3
seconds, until the Learn LED turns green.
3 While keeping the HTRM 2 pointed toward the component, enter the
rst appropriate three-digit code-library number from the table below.
4 Press [OFF]. If the component turns o, press [ENTER] to accept that
code-library number and exit the Library Mode.
5 If the component does not turn o, enter the next three-digit code-
library number from the table.
6 When you enter the correct number the component will turn o; press
[ENTER] to accept that code library number and exit the Library Mode.
LIBRARY
CODE
NAD PRODUCT
DESCRIPTION
LIBRARY
CODE
NAD PRODUCT
DESCRIPTION
100 Receiver/Processor
(Discrete ON/OFF) 300 Tuner
101 Receiver/Processor
(Toggle ON/OFF) 301 L75, L76 Tuner
102 S170 302 L70 Tuner
103 L75 303 L53 Tuner
104 Second Zone Commands
(Zone 2) 304 L73 Tuner
3112 Zone 3 305 C425
4112 Zone 4 306 C445
105 L70 307 Txx5 Series Tuner
106 L76 400 Tape Deck B
107 118 401 TAPE Deck A
108 L53 500 TV 280
109 L73 501 MR13
110 Stereo Receiver / Amplier 502 MR20
111 Stereo Second Zone 503 PMR45
112 Txx5 Series 600 T535, T562, T585, M55
200 CD Player 601 T550, L55
201 CD Player (old) 602 T512, T531, T532, T571, T572
202 5170, 5240, 5340 603 L70, L73 BD
203 5325 604 L56
204 5060 605
T513, T514, T515, T517,
T524, T533, T534
205 M5 606 L53 BD
SEARCH MODE
If none of the codes from the table work, turn on the component and try
the “search” method as follows:
1 Enter Library Mode by simultaneously pressing-and-holding for 3
seconds the desired Device Selector key and the [A/V PSET] key, until
the Learn LED turns green.
2 Press-and-hold the HTRM 2’s [R] or [T]) key. The remote will step
through all the available codes at a rate of approximately 1 per second.
3 When the component turns o, release the cursor key.
4 Press [ENTER] to accept that code library and exit Library Mode.
5 Try a few commands. Should you prove to have stepped past the
needed code-library, re-enter the Library Mode and use the cursor key
to step back to it.
NOTE
It is possible that search mode will nd code-libraries that operate, at
least partially, some other brand (non-NAD) components. However, we
can only ensure the completeness or accuracy of NAD code-libraries. We
do not support the HTRM 2’s operation with other-brand components.
CHECKING CODE LIBRARY NUMBER
1 Enter Library Mode by simultaneously pressing-and-holding for 3
seconds the desired Device Selector key and the [A/V PSET] key, until
the Learn LED turns green.
2 Press the [DISP] key.
3 The HTRM 2 indicates the current code-library by ashing its [DAC],
[CUSTOM], and [MACRO] keys.
For example, to indicate code-library #501, the HTRM 2 will ash [DAC] 5
times, pause, and then ash [MACRO] once. You might wish to make a note
of your components’ code-library numbers.
SUMMARY OF THE HTRM 2 MODES
Mode Keys To Press (for 3 seconds)
Learn/Copy/Punch Through Device Key + RES Key
Delete Mode Device Key + RTN Key
Macro Record Macro Key + Function Key
Library Mode Device Key + [A/V PSET] Key
Back Light Timeout DISP Key + Digit Key
Factory Reset See “Factory Reset” above
OPERATION
USING THE HTRM 2 REMOTE CONTROL
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M33 in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M33

NAD M33 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info