745037
8
Zoom out
Zoom in
Previous page
1/26
Next page
ENGLISH
8
1 LAN/USB
LAN
LAN connection must be setup for wired connection to be
established. Set up a Wired Ethernet broadband router with
broadband internet connection. Your router or home network
should have a built-in DHCP server to consummate the connection.
Using a standard straight-through Ethernet cable (not supplied),
connect one end of the Ethernet cable to the LAN port of your
wired Ethernet broadband router and the other end to M33’s LAN
port.
NOTES
NAD is not responsible for any malfunction of the M33 and/or the
internet connection due to communication errors or malfunctions
associated with your broadband internet connection or other
connected equipment. Contact your Internet Service Provider (ISP) for
assistance or the service bureau of your other equipment.
Contact your ISP for policies, charges, content restrictions, service
limitations, bandwidth, repair and other related issues pertinent to
internet connectivity.
USB
Connect to this USB port USB mass storage devices formatted as
FAT32, NTFS or Linux ext4. The connected USB device appears as a
Local Source (USB) in the BluOS App.
Access and playback music stored in the connected USB device by
selecting “USB” from the BluOS App.
2 HDMI ARC
Connect to TV that supports HDMI Control (CEC) and Audio Return
Channel (ARC) functions. Both functions are possible if external
devices that also support both features are interconnected with
M33 via HDMI connection.
Use HDMI cable to connect HDMI ARC to corresponding HDMI ARC
port of TV.
With ARC connection established, M33 will output audio signal
from TV.
IMPORTANT
Ensure that the audio setting/format of ARC-connected devices to M33
is set to PCM only.
Only audio output signal from TV is supported by HDMI ARC port. There
is no video output at HDMI ARC port of M33.
3 WI-FI AND BLUETOOTH ANTENNA TERMINALS
Install supplied antennas to corresponding Wi-Fi and BT antenna
terminals.
4 SUB OUT 1, 2
Connect SUB OUT 1 and/or SUB OUT 2 to the low level input of
corresponding powered subwoofer.
Low frequency information up to 80 Hz is sent to the connected
subwoofer.
5 RESET
Use this tact switch in forcing the factory reset of the unit. Refer
to item about FORCING FACTORY RESET under FACTORY RESET
section.
IDENTIFICATION OF CONTROLS
REAR PANEL
© NAD M33
1 2 3 4 5 6
10 11 12 2019181716151413
7 8 9
21
ATTENTION!
Please ensure that the M33 is powered o or unplugged from the mains power outlet before making any connections. It is also advisable to power down or
unplug all associated components while making or breaking any signal or AC power connections.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M33 in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M33

NAD M33 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info