745050
5
Zoom out
Zoom in
Previous page
1/10
Next page
ENGLISH
5
IDENTIFICATION OF CONTROLS
FRONT PANEL
1 o (STANDBY)
Press o (Standby) button for the M28 to be switched ON from
standby mode. The Power indicator will turn from amber to bright/
white color.
Press and hold o (Standby) button until M28 switches back to
standby mode. The Power indicator will illuminate to amber color at
standby mode.
The o (Standby) button cannot activate the M28 with the rear
panel POWER switched o.
IMPORTANT NOTE
For the o (Standby) button to activate, two conditions must be
completed.
Plug-in the supplied mains power cord to a mains power source.
Connect corresponding end of the mains power cord to the AC mains
input of M28 and the plug connected to a mains power source.
The rear panel POWER switch must be set to ON position.
AUTO STANDBY
The M28 can be setup to automatically go to standby mode if there is no
active source input within 30 minutes. Auto standby mode can be enabled
or disabled by the following steps.
Enable Auto Standby mode
With M28 at operating mode, press and hold the LED LEVEL button until
the Power indicator (NAD logo) ashes once.
At operating mode, the M28 will automatically go to standby mode if
there is no active source input within 30 minutes.
Disable Auto Standby mode
With M28 at operating mode, press and hold the LED LEVEL button until
the Power indicator (NAD logo) ashes twice.
At operating mode, M28 will not automatically go to standby mode
even if there is no active source input within 30 minutes. Press o to
switch M28 from operating mode to standby mode.
2 POWER INDICATOR (NAD LOGO)
The NAD logo in the front panel also serves as a Power indicator.
Power indicator colors
Bright/white - Normal operating mode
Amber - Standby mode
Red - Protect mode
© NAD M28
1
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M28 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info