745036
18
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
SPEAKER DISTANCE
Your systems speaker distance settings are a subtle but important
renement of your setup. Informing the M17 of the loudspeaker-to- listener
dimensions of each speaker automatically imposes the correct delays,
optimizing imaging, intelligibility and surround-sound ambience. Enter
your dimensions with precision within about 1 foot (0.3m).
SETTING SPEAKER DISTANCE
While at “Speaker Distance” menu, use the [D/F] keys to individually set
the distance measured from your principal listening position to the front
surface of the corresponding loudspeaker. Distance can be set up to 30
feet or 9.1 meters. Distance can be displayed as feet or meters selectable at
the “Unit of Measure” item.
If Dirac Live calibration is completed and selected, the Dirac Speakers
Distance settings will be shown.
DIRAC LIVE
The proprietary Dirac Live is integrated with your M17. Dirac Live® is a
patented room correction technology that not only corrects the frequency
response, but also the impulse response of a rooms loudspeakers. Dirac
Live provides true impulse response correction over a large listening area,
improving the depth, positioning and distinction of individual voices and
instruments. Using multiple measurement and mixed phase correction,
Dirac Live helps create a natural, realistic and transparent sound with
tighter bass and reduced room modes, in a way previously not possible.
Initiate Dirac Live by following below Setup Requirements.
M17
Update your M17 to the latest rmware.
Speaker Conguration must match actual speaker setup – turn o
speakers that are not available.
Both your computer and M17 must be connected to the same network.
MICROPHONE
The supplied measurement microphone can be connected to either
the MIC or USB input of your computer or the USB input of the M17.
If the measurement microphone will be connected to the USB input of
your computer or the M17, ensure that the measurement microphone,
phone jack adapter and USB Mic adapter are all connected together.
The USB Mic adapter is not necessary if the measurement microphone
will be connected to the MIC input of your computer,
Minimize external noise such as talking, opening/closing of doors or
windows and playback of sound during the measurement.
Use a microphone stand to rmly place the microphone in the
indicated measurement positions.
COMPUTER WINDOWS, macOS
Both your computer and M17 must be connected to the same network.
Any active rewalls should allow HTTP (normal WWW access).
Turn o any computer programs that may make any noise.
Download the Dirac Live Calibration Tool™ installer.
Run the Dirac Live Calibration Tool™. Follow on-screen instructions. Refer
also to the HELP window for more detailed instructions.
View and follow simulated Dirac Live Calibration at:
nadelectronics.com/dirac-live
For further information about Dirac Live Room Correction technology, visit:
www.dirac.com/live-home-professional-audio-info
ADJUSTING THE VOLUME
In addition to the Volume knob, use the HTRM 2’s VOL [5/6] to adjust the
“master volume” of the M17 raising or lowering the channels altogether. A
momentary keypress will change the master volume by 0.5dB increments.
If you hold down VOL [5/6], the master-volume change will “run-on until
the key is released.
Since recordings vary considerably in overall average level, there is no
imperative to listen at any particular master-volume setting. A setting
of -20dB may sound “as loud” from one CD or DVD as -10dB does from
another.
The M17 will power-up from Standby mode at whatever master volume
setting was last used; however, if the prior setting was greater than -20dB,
the M17 will power up at -20dB. This prevents inadvertently beginning a
session at excessive volume.
MUTING THE SOUND
Use the HTRM 2’s [MUTE] key to silence all channels completely. Muting is
always available regardless of the source or listening mode selections.
NOTES
Changing input or listening-mode selections does not release muting.
Adjusting the volume level via the HTRM 2 or the front panel volume
knob will automatically release the mute function.
OPERATION
USING THE M17  SETUP MENU
18
HTRM 2
ON
OFF
SOURCE
10
IN
SSEETTUUPP DDEELLAAYY // PPIICCTTUURREE TTEESSTT // ZZOOOOMM
EEQQ TTOONNEE LL..NNIITTEE
DDIIMMMMEERR
CHANNEL VOLUME
8
IN
MMUUTTEE
PPRROOGGRRAAMM CCLLEEAARR RREEPPEEAATT
DAC
DEVICE SELECTOR
MP
SSLLEEEEPP
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M17 V2i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M17 V2i in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M17 V2i

NAD M17 V2i User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info