745036

NAD M17 V2i Manual

16
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
VIDEO INPUT
All available HDMI sources can be assigned as video input to a particular
Source. Select “O” if it is intended not to assign any video input to a
particular Source.
HDMI $ HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5
Previous $ Display or retain preceding video.
A/V PRESET
A particular Source can be assigned a stored Preset. The parameters set up
in the selected Preset number will be adopted into the particular Source it
is assigned (Please refer to the separate section on “A/V Presets” for further
understanding of Preset settings).
If it is desired not to assign the particular Source a Preset setting, select
“None”.
TRIGGER OUT
The Trigger Out for a particular Source is dependent upon the
congurations done in a separate menu on Trigger Setup (See “Trigger
Setup” below). If “Source Setup” is assigned to all three Trigger output
(Trigger Out 1-3) in the separate “Trigger Setup” menu window, a particular
Source can have the following Trigger Out combinations
Trigger Out: Trigger1 $ Trigger2 $ Trigger 1+2 $ Trigger 3 $
Trigger 1+3 $ Trigger 2+3 $ Trigger1+ 2+3
Above combinations are dependent upon the assignment of “Source
Setup” for all Trigger 1 Out, Trigger 2 Out or Trigger 3 Out settings at the
“Trigger Setup” menu. If only Trigger 1 Out is set “Source Setup”, only
“Trigger 1” and “None” are available options at Trigger Out setting for a
particular Source.
None: Particular Source is not assigned any Trigger Out option.
IMPORTANT
For “Trigger Out” to be assignable at “Source Setup” menu, make sure to
carry out following.
• In the separate “Trigger Setup” menu, assign Trigger 1 Out, Trigger 2 Out
or Trigger 3 Out to “Source Setup.”
• “Trigger Out” will not be congurable and remain at “None” setting if at
the separate “Trigger Setup” menu, none of the Trigger 1 Out, Trigger 2
Out or Trigger 3 Out settings is allocated to “Source Setup.”
SPEAKER SETUP
After connecting all ancillary sources and other combinations, the Speaker
Setup menu will guide you on how to manage and setup your speakers in
order to achieve optimum sound acoustics in your listening environment.
The following are the Speaker Setup Menu sections.
IMPORTANT NOTICE
The M17 is an AV Surround Sound Preamplier and therefore has no
speakers. The mention of “Speaker(s)” in this manual refers to the
speakers of your external amplier as interfaced with the M17.
SPEAKER CONFIGURATION
Every surround-sound system requires “bass-management” to direct low-
frequency content from any or all channels to the speakers best able to
reproduce it. For this function to operate correctly, it is important that you
correctly identify your speakers’ capabilities. We use the terms “Small” and
“Large” (and “O”) but note that physical size may be irrelevant.
• A “Small” speaker is any model, regardless of physical size, that lacks
signicant deep-bass response, that is, below about 200 Hz.
• A “Large” speaker is any full-range model; that is, one with deep-bass
response
• An “O” speaker is one that is not present in your system. For example,
you might not have any surround-back speakers installed; in that case,
you would set the “Back” setup item to “O”.
• For “Height” speakers, selecting “O” option for “Height 1” will
automatically cut o both Height 1 and Height 2 Audio output.
The Speaker Conguration is “global”; that is, it remains in force with all
inputs and in all listening modes. However, speaker settings are part of the
M17’s Preset system. Consequently, multiple speaker settings can be stored
for easy recall as dierent types of recordings or listening modes require.
Speaker Conguration can be managed and adjusted by pressing
a combination of [S] and then [D/F] keys. Set “Front”, “Center” and
“Surround” to “Large”, “Small” or “O” as your subsystem’s speakers require.
Set “Back” to either “Stereo” or “Mono” as per speaker availability. Set
“Subwoofer” to “On” or “O, ”selecting “On” only if you have a subwoofer
connected to the M17’s SUBW1 or SUBW2 output jack. If “Subwoofer” is set
to “O”, “Front” speakers will automatically be set to “Large”.
HEIGHT 1/HEIGHT 2
“Height 1” and “Height 2” AUDIO PRE-OUT can be connected to the audio
input of an external power amplier hooked up with up to 4 Height
speakers.
Height1/Height 2 settings must be set to “On” at the “Speaker
Conguration” menu to activate the additional Height speakers and be
congurable.
OPERATION
USING THE M17  SETUP MENU
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M17 V2i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M17 V2i in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M17 V2i

NAD M17 V2i User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info