745036
15
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
ARC Mode: Audio Return Channel (ARC) enables an ARC-enabled TV
to send audio data “upstream to M17.
This option has three choices: O, Auto or Source Setup.
Auto: When set to Auto, the M17 will automatically attempt an ARC
audio connection to the TV whenever the TV announces over CEC
that it has become the active source. If an ARC connection can be
established, the M17 will output the ARC audio signal no matter
what source is selected on the M17 and will show “HDMI ARC on
the front panel display. The Auto option tends to work best when
all your devices support CEC and the Source Switch option is set to
“On.
Source Setup: When set to Source Setup, you can select ARC” for
the digital audio input in the source setup screen. When you select
a source on the M17 which is set for ARC, the M17 will attempt to
initiate an ARC connection with the TV. When using this option,
you would probably also want to make sure Source Switch is o
otherwise other CEC devices may keep changing the M17 source
when you want it to remain on the ARC source.
IMPORTANT NOTES
Audio System” must be set to “On” for “ARC Mode” to be congurable.
Otherwise, “ARC Mode“ will remain “O” .
“CEC/LAN/BluOS in Standby” must be set to “On” for audio and video
to continuously stream from a CEC-enabled HDMI source to a CEC-
enabled TV (with both devices connected via M17).
SOURCE SETUP
The Source Setup menu makes it possible to set, allocate or change the
Sources settings.
The M17 Sources are all congurable. Each Source can be congured with
respect to the following settings.
ENABLED
One can enable/disable a Source via this option. This is particularly useful
if only few Sources are used and one directly selects the Source from the
front panel, bypassing unused sources.
Yes/No: Select Yes” to enable the particular Source or “No” to disable
the Source.
NAME
A new Name maybe assigned to a Source label. For example, if your BD
player is attached to “Source 1”, it is possible to rename “Source 1”to“BD
Player”.
In order to rename the Source label, scroll to the “Name” parameter. Press
[S] to go to the rst character. Then, press [D/F] to pick through the
alphanumeric selections.
Press [S] to move to the next character and at the same time save the
changes done on the current character. The name can be as long as twelve
characters.
The new Name will be shown in the front panel display as well as on the
OSD.
ANALOG AUDIO
All available analog Sources can be specically assigned to any of the main
Sources.
Active analog Source: Use [D/F] to select and assign an active
Source input to a particular main Source.
O: No incoming analog audio signal is selected by the particular
Source.
NOTE
An incoming digital signal present at the assigned digital input will
always take precedence over the assigned analog audio input if both
are present. To maintain the analog audio input for the particular
Source, select “O” at the “Digital Audio” setting of the same “Source”
menu.
ANALOG GAIN
Gain adjustment allows all sources to play back at the same volume level so
you don’t need to adjust the volume every time a new source is selected. It
is generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to Analog Gain, press [S] and then [D/F] to step through the
desired level from -12dB to 12dB.
DIGITAL AUDIO
To take advantage of the M17’s high performance surround and digital
audio circuitry, it is advisable that its Digital Audio inputs are selected. There
are various types of Digital Audio input for the M17. These are HDMI, BluOS,
Optical and Coaxial digital inputs. Select “O if it is intended not to assign
any digital audio input to a particular Source.
The following are the sets of assignable Digital Audio input.
HDMI $ HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5
Optical $ Optical 1, Optical 2
Coaxial $ Coaxial 1, Coaxial 2
BluOS
NOTE
An incoming digital signal present at the assigned digital input will
always take precedence over the assigned analog audio input if both
are present. To maintain the analog audio input for the particular
Source, select “O” at the “Digital Audio” setting of the same “Source”
menu.
OPERATION
USING THE M17  SETUP MENU
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M17 V2i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M17 V2i in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M17 V2i

NAD M17 V2i User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info