562261
23
Zoom out
Zoom in
Previous page
1/38
Next page
TRIGGER SETUP
The M17 features three congurable +12V DC Trigger Output that can be
used to activate a component or system it is fed into. A Trigger Input is also
available to turn on the applicable link it is associated to. Use a combination
of [W/E/R/T] and [ENTER] keys to navigate through the Trigger Setup
menu parameters.
TRIGGER OUT
Triggers are low voltage signal used to turn on/o other compliant devices.
The M17’s three +12V DC Trigger Output (Trigger 1 Out, Trigger 2 Out and
Trigger 3 Out) are dependent upon the mode they are associated with. The
following are the choices where +12V DC output can be assigned.
Main: +12V DC is available at the assigned Trigger Out when the M17 is
at powered state.
Zone 2, Zone 3, Zone 4, Zone 2+3+4: When the applicable Zone is at
powered state, +12V DC is available at the assigned Trigger Out.
Main+Zone 2, Main+Zone 3, Main+Zone 4, Main+Zone 234:
+12V DC is available from Trigger Out when either the M17 or the
applicable Zone is powered up.
Source Setup: If Trigger Output is linked to “Source Setup, +12V DC
is available at Trigger Out whenever the particular assigned Source is
selected. Please see also separate discussion about Trigger Out under
the Source Setup (Normal View) section.
DELAY
The availability of +12V DC at Trigger Out can be regulated. If it is desired
that +12V DC is available without delay the moment Trigger Out is linked
to its assigned setting, set Delay to 0s. Otherwise, one can select through a
delay time of 1s to 15s.
AUTO TRIGGER IN
Auto Trigger IN allows external system controllers to toggle the associated
section of the M17 from “Standby” to “On” and vice versa. When the +12V
TRIGGER IN switch at the rear panel is set to AUTO, a +12V DC input at
Trigger IN will power ON the section where Trigger IN is assigned.
Main: From standby mode, the M17 is powered ON when +12V DC is
applied at Trigger IN.
Zone 2, Zone 3, Zone 4: Applicable Zone is turned ON whenever
+12V DC is present at Trigger IN.
All: Main, Zone 2, Zone 3 and Zone 4 as described above will all be
activated given a +12V DC input at Trigger IN.
WARNING
If “Auto Trigger In” at Trigger Setup menu is assigned to “Main” or “All”
and the +12V TRIGGER IN switch is set to “AUTO” mode, the (Standby)
button in the front panel as well as the corresponding ON/OFF function
keys in the HTRM 2 remote control will be disabled eectively handling
this function to an external controller. Slide to “OFF” the +12V TRIGGER
IN switch to maintain normal power ON/OFF function procedures.
LISTENING MODE SETUP
The M17 has various listening mode options and is mostly congurable.
These are provided to reproduce a variety of sound eects depending upon
the content of the source to be played. Use a combination of [W/E/R/T]
and [ENTER] keys to congure the following settings.
LISTENING MODES
The audio format as detected by the selected Source can be automatically
congured and processed through the following options:
DOLBY
Dolby Digital is the multi-channel digital signal format developed in the
Dolby laboratories. Discs bearing the Dolby Digital (double-D symbol) logo
were recorded with up to 5.1 channels of digital signals, reproducing a
much better sound quality, with dynamic and spatial sound sensations that
are much better than in the previous Dolby Surround.
A Dolby Digital audio input can be congured relative to its format as
follows
Stereo: If the detected audio is of Dolby stereo format, you can default
it to one of the following settings - Pro Logic, PLIIx Movie, PLIIx Music or
None.
Surround: If the detected audio is of Dolby Surround format, you can
default it to one of the following settings - Surround EX, PLIIx Movie,
and PLIIx Music, Stereo Downmix or None.
None: If “None” is selected, the Dolby Digital signal will be defaulted
to the “Stereo or “Surround” settings set forth at the “PCM” option. See
discussion below about “PCM”
OPERATION
USING THE M17  SETUP MENU
23
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M17 AV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M17 AV in the language / languages: English as an attachment in your email.

The manual is 7,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M17 AV

NAD M17 AV Quick start guide - English - 2 pages

NAD M17 AV User Manual - German - 38 pages

NAD M17 AV User Manual - Dutch - 38 pages

NAD M17 AV User Manual - French - 38 pages

NAD M17 AV User Manual - Italian - 38 pages

NAD M17 AV User Manual - Swedish - 38 pages

NAD M17 AV User Manual - Spanish - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info