Manual NAD CI9060 (page 17 of 146) (English)

602911

Zoom out

Zoom in

1/146

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

Troubleshooting

PROBLEM CAUSE SOLUTION

No sound

• Power AC-mains cable unplugged

• VACATION switch set to VACATION

• The Protection mode is engaged

• External fuse blown

• Check if AC-mains cable is plugged in and

power switched on

• Set the VACATION switch to ON

•Switch amplifier off via VACATION switch. Make

sure ventilation slots on top, side, and back of the

amplifier are not blocked. After amplifier has

cooled down, switch the amplifier on

• Replace fuse

• Consult dealer/installer

No sound in one channel

• Speaker not properly connected or damaged

• Input cable pulled loose or making poor contact

at Flex-Pad socket

• Short-circuit or broken wire in a defective patch

or speaker cable

• Check all connections both at the speakers and

at the amplifier

•Check leads and Flex-Pad cables

• Switch the amplifier to VACATION mode, check

and replace cables if necessary

Weak bass/ poor stereo image

• Speakers wired out-of-phase • Reverse connections at the back of the suspect

amplifier output

• Check connections to all speakers in the affected

zone/room

Low or distorted sound in one zone/room

and OMC LED on

• Shorted speaker cable to zone/room

•Too high of an input level to one or more

amplifier channels

•Too low an impedance on one or more amplifier

zones/rooms

• Switch off amplifier via VACATION switch and

remove one at a time a pair of speaker cables

from the amplifier, then switch the VACATION

switch to the ON position and restore audio

source. Continue this procedure until the OMC

LED does not turn on. Replace the shorted

speaker cable to the zone/room

•Turn down the input level to the room/zone that

may be suspect

•Too many speakers connected to one channel, or

incorrect speaker pad or matching transformer

impedance settings. Remove some speakers or

check speaker pad and/or documentation

supplied from the speaker pad manufacturer for

correct impedance settings

• Damage to speaker pad. Replace speaker pad

CI9120_9060 manual (GB) 12/12/02 9:09 pm Page 17

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NAD CI9060 in the language / languages: English as an attachment in your email.

The manual is 4,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NAD CI9060 Manual

Product: