158474
9
Zoom out
Zoom in
Previous page
1/24
Next page
1 SPEAKERS: Connect the left and right terminals to the corresponding
loudspeakers. Make sure that the “+” (red) terminal and “-” (black)
terminal are connected to the corresponding “+” and “-” terminals of the
loudspeaker. Use extra care to ensure that no stray wires or strands cross
between posts or terminals at either end.
NOTES
Use stranded wire of at least 16-gauge (AWG); specialized speaker cable
may be valuable (consult your NAD audio specialist). Connections to the
C 715 can be made with banana-type plugs, or using bare wire, or pins,
by loosening the terminal’s plastic nut, making a clean, neat connection,
and re-tightening carefully. To minimize the danger of short-circuits,
ensure that only 1/2-inch of exposed wire or pin is employed in
connecting.
This unit is designed to produce optimum sound quality when
connected to speakers with impedances within the receivers operating
range. Please check that speakers are rated to be 6 ohms minimum per
speaker.
2 FM, AM ANTENNA INPUT: Connect the supplied lead-type FM
antenna to the FM antenna input. Extend the lead. Experiment freely
with your antenna placement and orientation until you get the clearest
sound and lowest background noise. Fix the antenna in the desired
position by using thumb tacks, push pins or any suitable means.
The AM loop antenna supplied with the C 715 (or a suitable
replacement) is required for AM reception. Open the clip terminal
lever; insert the wire making sure to match the color-coded (white
and black) ends of the wire to that of the terminal and close the
lever ensuring that the lever locks the wire in place. Testing dierent
positions for the antenna may improve reception; vertical orientation
will usually produce the best results. Antenna proximity to large metal
objects (appliances, radiators) may impair reception, as will attempts to
lengthen the wire to the loop.
3 OPTICAL DIGITAL OUT: Connect the OPTICAL DIGITAL OUT port to
the corresponding S/PDIF digital input of a compatible device such as
CD recorders, receivers, computer soundcard or other digital processors.
4 TAPE IN/OUT: Connections for analog recording and playback to an
audio tape recorder of any type. Using twin RCA-to-RCA leads, connect
the left and right Audio Output” of the tape machine to the C 715’s
TAPE IN sockets for playback and tape monitoring. Connect the left and
right Audio Input” of the tape machine to C 715’s TAPE OUT sockets for
recording.
NOTE
There will be no output at TAPE OUT when TAPE is selected. Likewise,
there will be no output at VIDEO OUT when VCR is the active source
input. This prevents feedback through the recording component thereby
preventing possible damage to your speakers.
5 VCR IN/OUT: VCR may be used with recording components such
as a cassette deck. Connect analog stereo audio from such source
components into the C715’s VCR IN. Connect the C 715’s VCR OUT to
the source components’ record-input. Note that VCR may freely be used
for play-only components, in which case the OUT jacks would remain
unconnected.
6 AUX IN: Input for additional line level input such as another CD player.
Use a twin RCA-to-RCA lead to connect the auxiliary units left and right
Audio output” to this input.
7 SUBWOOFER OUT: Connect this output to a powered (“active”)
subwoofer (or to a power amplier channel driving a passive system).
8 AC LINE CORD: Plug the AC power cord into a live AC wall socket.
Make sure all connections have been made before connecting to mains.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the C 715 is powered o or unplugged before making any connections. It is also advisable to power down or unplug all associated
components while making or breaking any signal or AC power connections.
8 7 6 5 4
1 32
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD c715 dab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD c715 dab in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD c715 dab

NAD c715 dab User Manual - German - 24 pages

NAD c715 dab User Manual - Dutch - 28 pages

NAD c715 dab User Manual - French - 24 pages

NAD c715 dab User Manual - Italian - 24 pages

NAD c715 dab User Manual - Swedish - 24 pages

NAD c715 dab User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info