6
ENGLISH FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
C 555i CARTRIDGE SPECIFICATION: GOLDRING ELECTRA
TRANSDUCER CHARACTERISTICS
Frequency response 20Hz - 20 kHz ±3dB
Channel balance 2dB at 1 kHz
Channel separation 20dB at 1 kHz
Output level 5mV ±2dB at 1 kHz at 5cm/s
Static compliance 16mm/N
Equivalent tip mass 0.7mg
Vertical tracking angle 26 degrees
Stylus radius Elliptical 0.00072” x 0.0003” / 18µ x 7µ
Stylus type replaceable
ELECTRICAL CHARACTERISTICS
Load resistance 47k ohms
Load capacitance 150 - 400pF
Internal inductance 560mH
Internal resistance 700 ohms
MECHANICAL CHARACTERISTICS
Cartridge weight 4.2g
Fixing centres 0.5” / 12.7mm
Tracking weight 1.5 - 2.0g (1.7g nominal)
TURNTABLE
Drive system Belt drive
Motor High torque synchronous motor
Speeds 33.3 and 45.1 rpm
Suspension system 3 energy absorbent synthetic rubber feet
TONEARM
Operation Manual
Length 289mm total length - 244mm pivot to stylus
Effective mass 9 grams
Overhang 19.1mm
Cable capacitance 150-400pF
PHYSICAL SPECIFICATIONS
Dimensions (WxHxD) with dust cover down 17
3
/8 x 4
9
/16 x 14” / 447 x 115 x 356mm
Net Weight 11.57lb / 5.25kg
Shipping Weight 15.21lb / 6.9kg
TRANSDUCER CHARACTERISTICS
Vertical tracking angle 20 degrees
ELECTRICAL CHARACTERISTICS
Recommended load resistance 47k ohms
Recommended load capacitance 200 - 600pF
Internal impedance, DC resistance 750 ohms
MECHANICAL CHARACTERISTICS
Output voltage at 1000 Hz, 5cm/sec.
Replacement stylus unit
Tracking force range
Tracking force, recommended
C 552 CARTRIDGE SPECIFICATION: ORTOFON OM5E
Frequency response 20-20.000 Hz ± 2 dB
Channel separation 22dB at 1 kHz 15dB at 15kHz
Internal inductance
Channel balance 2dB at 1 kHz
Cartridge weight 5 g
Tracking weight 1.5 - 2.0g (15-20 mN)
Stylus radius r/R 8/18 µm
Stylus type Elliptical 0.00072” x 0.0003” / 18µ x 7µ
4mV
450mH
Stylus 5 E
1,5-2,0 g (15-20 mN)
1,75 g (17,5 mN)
C 555i/C 552 SPECIFICATIONS
C555i/C552 1 cdr 27 02 8_8lang_v0 . / /200