161019
9
Zoom out
Zoom in
Previous page
1/68
Next page
9
ENGLISH
FRANÇAISDEUTSCHNEDERLANDSESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
SETUP FOR CUSTOM AND MULTI-ZONE INSTALLATIONS
REMOTE CONTROL CODES
The NAD C 422 has a remote control command receiver built in so it will
respond to NAD remote control commands, such as from most NAD
system remote controls (SR-4, SR-5, S70; not supplied with C 422). This
will allow access to basic functions such as preset up/down, On/Stand-
by.
Particularly with Custom Install in mind, the NAD C 422 will respond to
other commands not usually found on NAD remote control handsets.
The table below indicates all commands the C 422 recognises.
The NAD C 422 uses the NEC format for IR transmission; customer code
is 877C, the corresponding hex codes are next to the IR command:
Footnote Function Hex Code
1Preset D2
Preset D1
2 Search 87
Search 86
3Tune D4
Tune D3
4Preset 1 8A
Preset 2 8E
Preset 3 92
Preset 4 94
Preset 5 8B
Preset 6 8F
Preset 7 03
Preset 8 97
Preset 9 98
Preset 0 C7
5 Enter C5
6 Power/standby toggle 80
7 Power On 25
8 Standby C8
1Preset and scroll trough presets, with wrap-around.
2 Search and will engage auto-searching, with wrap-
around.
3Tune and will engage tuning. if command received for
more than 1 second, auto-search is engaged; wrap around
4Preset 1-9, 0: Allows direct entry of preset number. First send desired
number code, send Enter code to confirm. If preset is empty, tuner
will default to current status.
5 Enter: To confirm and engage preset number. Program small macro
with preset 1-9,0 and enter to gain direct preset access.
6 Power/Stand-by toggle: Switches tuner from On to Stand-by and
vice-versa. This code is also used on other re mote controlled
products.
7 Power On: To avoid sync problems with other NAD products also
using the Power/Stand-by toggle, the C 422 responds to separate On
code in addition; if already switched on, it will remain on.
8 Stand-by: For same reason as above. If already in Stand-by mode, it
will remain so.
12V TRIGGER INPUT
NAD components equipped with 12V output triggers are fully
compatible with the C 422’s 12V input trigger.
Plug type: 3.5mm mono mini-jack
Operating range: 6 to 15 V DC
Current drawn: <10mA
Centre pin = +
Shaft =
C422 manual - 6 8/8/03 5:32 PM Page 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD c422 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD c422 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info