493506
12
Zoom out
Zoom in
Previous page
1/18
Next page
USING THE SR 8 REMOTE CONTROL
The SR 8 remote control handset handles the key functions of the C 356BEE as well as other NAD
Stereo Receivers, Integrated Ampliers and Preampliers. It has additional controls to remotely operate
NAD CD Players, AM/FM Tuners and dedicated AM/FM/DB Tuners. It will operate up to a distance of
23ft (7m). Alkaline batteries are recommended for maximum operating life. Two AA batteries should
be tted in the battery compartment at the rear of the Remote Control handset. When replacing
batteries, check that they have been put in the right way round, as indicated on the base of the battery
compartment.
When a command from the remote control is received, the Standby LED indicator will blink. Note that
the indicator may also blink when receiving commands not necessarily for the C 356BEE but for other
components in the system. Please refer to previous sections of the manual for a full description of
individual functions.
NOTE
The remote control handset supplied with the C 356BEE is of universal type designed to operate
several NAD models. Some buttons are applicable only to specic NAD models. Contact your dealer
or NAD audio specialist for assistance.
1 POWER ON, OFF: The SR 8 remote has a separate ON and OFF button. With the rear panel POWER
switch set to ON position, press the ON button to switch the C 356BEE from Standby mode to
operating mode. Press the OFF button to switch the unit to Standby mode.
2 DEVICE SELECTOR: A Device Selector button determines only what component the SR 8 will
command; it does not perform any function on the C 356BEE. Press desired Device Selector button
for the applicable buttons to be directed to a “page” of commands relevant to the selected device.
Upon selecting a Device, you can now press the corresponding SR 8 control buttons applicable for
the selected Device.
3 INPUT SELECTORS: Refer to the corresponding labels printed in the remote control faceplate
and their respective assigned buttons to make use of these functions. Set the DEVICE SELECTOR
to AMP in order to gain access to these buttons. The input selector buttons perform the same
functions as the buttons labeled the same on the front panel.
4 NUMERIC KEYS: The numeric keys allow for direct input of tracks for CD players, and direct
channel/preset access for tuners and receivers.
5 SLEEP: Switch o the NAD Receiver or Tuner after a preset number of minutes.
6 MUTE: Press the [MUTE] button to temporarily switch OFF the sound to the speakers and
headphones. MUTE mode is indicated by the Standby LED indicator ashing for NAD Integrated
Ampliers or “Mute” shown in the VFD of NAD Receivers. Mute does not aect recordings made
using the TAPE output terminals but will aect the signal going to the PRE OUT terminals. Press
[MUTE] again to restore sound.
7 DIM (for use with compatible NAD Stereo Receiver, Tuner and CD Player): Reduce, turn o
or restore VFD brightness. Depending on the NAD model, the brightness of the front panel display
will vary when you toggle this button.
8 VOL : Press [VOL ] button to increase or decrease the loudness level. Release the
button when the desired level is reached. For NAD Receivers, the VFD will also show Volume Up
or Volume Down while pressing SR 8’s [VOL ] buttons. The VOLUME buttons do not aect
recordings made using the TAPE output terminals but will aect the signal going to the PRE OUT
terminals.
9 SPK A, SPK B: The [SPK A] and [SPK B] buttons engage or disengage the speakers connected
respectively to the SPEAKERS A and SPEAKERS B terminals. Toggle [SPK A] to switch ON or OFF the
speakers connected to the SPEAKERS A terminals. Toggle [SPK B] to switch ON or OFF the speakers
connected to the SPEAKERS B terminals. Press both buttons to engage both speakers.
10 TONE DFT: Tone Controls are enabled or disabled by pressing this button.
IDENTIFICATION OF CONTROLS
SR 8 REMOTE CONTROL
2
7
8
9
1
3, 4
6
5
10
12
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 356 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 356 BEE in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 356 BEE

NAD C 356 BEE User Manual - German - 18 pages

NAD C 356 BEE User Manual - Dutch - 18 pages

NAD C 356 BEE User Manual - French - 18 pages

NAD C 356 BEE User Manual - Italian - 18 pages

NAD C 356 BEE User Manual - Portuguese - 18 pages

NAD C 356 BEE User Manual - Swedish - 18 pages

NAD C 356 BEE User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info