493508
8
Zoom out
Zoom in
Previous page
1/13
Next page
1 DISC INPUT: Input for additional line level input signals such as CD,
Mini Disc player or the output signal from a step-up amplier for a
turntable. Use a twin RCA-to-RCA lead to connect the auxiliary units left
and right Audio Outputs” to this input.
NOTE
If an external Media Player is connected to the front MP socket (using
a 3.5mm stereo plug) while listening to a DISC line-level source, the
external Media Player will be directly selected with the DISC line-level
source immediately disconnected.
2 CD INPUT: Input for a CD or other line-level signal source. Use a twin
RCA-to-RCA lead to connect the CD players left and right Audio
Outputs” to this input.
3 VIDEO INPUT: Input for the audio signal from a stereo VCR (or stereo
TV/Satellite/Cable receiver) or other line-level audio source. Using twin
RCA-to-RCA leads, connect to the left and right Audio Outputs” of the
unit to these inputs.
NOTE
These are audio inputs only.
4 AUX INPUT: Input for additional line level input signals such as another
CD player. Use a twin RCA-to-RCA lead to connect the auxiliary units
left and right Audio Outputs to this input.
5 TUNER INPUT: Input for a tuner or other line-level signal source. Use
a twin RCA-to-RCA lead to connect the tuner left and right Audio
Outputs” to this input.
6 TAPE IN/OUT: Connections for analog recording and playback to an
audio tape recorder of any type. Using twin RCA-to-RCA leads, connect
to the left and right Audio Output of the tape machine to the TAPE IN
sockets for playback. Connect the left and right Audio Input” of the tape
machine to the TAPE OUT sockets for recording.
TO MAKE A RECORDING
When any source is selected, its signal is also fed directly to any tape
machine connected to the TAPE OUT for recording.
7 SPEAKERS: Connect the right speaker to the terminals marked “R +”
and “R-” ensuring that the “R+” is connected to the “+” terminal on your
loudspeaker and the “R-” is connected to the loudspeakers “-” terminal.
Connect the terminals marked “L+” and “L-” to the left speaker in the
same way.
Always use heavy duty (16 gauge; 1.5mm, or thicker) stranded wire to
connect loudspeakers to your C 316BEE. The high-current binding post
terminals can be used as a screw terminal for cables terminating in
spade or pin sockets or for cables with bare wire ends.
The C 316BEE is designed to produce optimum sound quality when
connected to speakers with impedances within its operating range.
Please make sure that all the speakers are rated 4 ohms minimum per
speaker.
8 AC POWER CORD : Connect AC power cord only to the prescribed AC
Outlet, i.e., 120V 60 Hz or 230V 50 Hz.
9 POWER SWITCH: The POWER switch supplies the master AC mains
power for the C 316BEE. When this switch is at ON position, the
C 316BEE is in standby mode as shown by the amber status condition of
the standby LED. Toggle the front panels STANDBY button to switch ON
the C 316BEE or back to standby mode. Switch o the POWER switch
if you intend not to use the C 316BEE for long periods of time (such as
when on vacation). It is not possible to switch ON the C 316BEE using
the front panel STANDBY button or AMP 1 remote control’s [ON] button
if the rear panel POWER switch is switched o.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the C 316BEE is powered o or unplugged before making any connections. It is also advisable to power down or unplug all
associated components while making or breaking any signal or AC power connections.
1 432 5 6 9
7 8
8
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 316 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 316 BEE in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 316 BEE

NAD C 316 BEE User Manual - German - 12 pages

NAD C 316 BEE User Manual - Dutch - 12 pages

NAD C 316 BEE User Manual - French - 12 pages

NAD C 316 BEE User Manual - Italian - 12 pages

NAD C 316 BEE User Manual - Swedish - 12 pages

NAD C 316 BEE User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info