610991
22
Zoom out
Zoom in
Previous page
1/25
Next page
22
iVECTOR Heater/Cooler
13.0 Troubleshooting
Please follow the troubleshooting guide below before calling for
assistance. It is important to make sure that an apparent problem
with this unit is not the result of system controls being
incorrectly set, that there is no electrical supply to the unit or
that the unit is incorrectly set.
Possible Installation Faults
Poor heating or cooling performance from this unit could be the
result of one or more of the following factors which should have
been taken into consideration at the installation stage.
l Unit incorrectly sized against the room heat loss.
l Lack of water flow - Incorrect pipe size to unit
- Valves not fully open
- System incorrectly balanced
- Pump set too low
l Boiler or heat pump controls set too low.
System Diagnostic
A system diagnostic tool has been built into the control system
of this unit which enables testing of all the input and output
functions from the control.
Select AUTO setting in the user menu then press “Down” for
5 seconds.
Use the left and right arrows to scroll through the
inputs/outputs from relays, air sensor, water sensors, BMS inputs,
and screen to check as necessary.
Note: The control will revert back to the main menu after
1 minute if no buttons are pressed.
Heating Mode/
Cooling Mode -
No Fan
Poor heating
performance/
unit cycling on
water sensor
Possible Causes
Electrical supply switched off
Fuse blown
Unit switched off
Temperature set point reached
Water temperature reaching fan
convector below 32°C in heating
or above 15°C in cooling
Problem Remedy
Low water temperature to unit Turn up water temperature at boiler
or heat pump
Poor water flow Vent air from heating system
Switch on supply
Replace fuse
Switch unit on at LCD display
Increase temperature set point
Check boiler, heat pump or equivalent
Programmer ON
Boiler/Heat pump on and set to
correct setting
Pump running
Note: Operation of fan convector can be checked by
switching to manual fan setting
If the fan convector is still faulty after checking the above, call your installer or MYSON Service.
iVECTOR HEATER/COOLER
INSTALLATION, OPERATING, MAINTENANCE & AFTER SALES MANUAL
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Myson iV160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Myson iV160 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Myson iV160

Myson iV160 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info