774207
6
Zoom out
Zoom in
Previous page
1/43
Next page
10 11
TECHNICAL SPECIFICATIONS
WARRANTY
Max. operating pressure: 10 bar/145 Psi
Max. operating temperature: 40°C/104°F
Bottle capacity: 1.0 L (33.8 oz.)
Max. filling volume of the bottle: 0.85L (28,7 oz)
Requires no electricity
Mysoda is a registered trademark of Mysoda Oy.
We want to make sure that you enjoy your Mysoda sparkling water maker for a long
time. To ensure a complete user experience for you, our equipment has a twenty-
four (24) month warranty from the date of purchase. Our warranty is valid for
household use.
The warranty does NOT cover the following:
Defects caused by carbonating other liquid than water.
Wear and tear under normal consumer use (e.g. discoloration).
Defects and damage resulting from the use of a water bottle after expiration
time.
Defects and damage caused by a CO2 Cylinder used past its expiration date.
Defects due to damage during transport and any abnormal household use.
Defects due to the use of CO2 cylinders sold by non-authorized dealers.
Defects due to improper use, modification or commercial use of the sparkling
water maker.
If your Mysoda device needs servicing, contact your local Mysoda retailer or contact
Mysoda directly by emailing us at info@mysoda.eu or visiting our website:
www.mysoda.eu.
mysoda.eu
TROUBLESHOOTING
ISSUE
Water bottle can’t be
attached to the quick lock
Water bottle can’t be
released from the quick
lock
Water is not well
carbonated/bubbly
enough
Water bottle overflows
during the carbonation
CO2 cylinder leaks after
installation
130 litre cylinder can’t be
installed
Small, white ice particles
form around the nozzle
during the carbonation
Device makes a whistling
noise during the
carbonation
Quick lock is in wrong position
CO2 cylinder is running low
Bottle is overfilled
Water is too warm
Carbonating button is pressed too
long
CO2 cylinder is not screwed in tight
enough
CO2 cylinder is not screwed in tight
The bottom adapter is in the wrong
position
This is normal, especially when the
water is cold
This is normal and ends once the
carbonation is completed
Pull the quick lock and nozzle towards
yourself. Attach the bottle by turning
one quarter anti-clockwise
Water bottle is in wrong position Gently pull the water bottle towards
yourself until it reaches its fully
forward tilt position. Release the bottle
by turning one quarter clockwise.
Replace the used CO2 cylinder with a
new one
Fill the bottle with water up to the fill
line indicating the maximum level
Make sure the water used is as cold
as possible as CO2 dissolves better in
cold water
Do not press the carbonating button
for longer than 1–2 seconds at a time
Screw the CO2 cylinder tightly into
the device
Remove the CO2 cylinder and reattach
it securely. Do it by hand, do not use
tools. Do not overtight.
Uninstall the bottom adapter and put it
back the other way round.
PROBABLE CAUSE SOLUTION
EN
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mysoda Toby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mysoda Toby in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info