802097
33
Zoom out
Zoom in
Previous page
1/52
Next page
Insert mains cable through the installed cable gland (if not
already done so). Strip back outer sheath ensuring all cables
reach the terminal blocks (leaving a little excess). Strip back all
coloured cables approx 10mm.
If using hard wired CT clamps now is the time to insert these too (we recommend a
specialist cable gland that can accommodate multiple cables whilst still maintaining IP
integrity).
Do not overtighten the electrical terminals. The recommended torque setting
for the electrical terminals is 1.2Nm
For single-phase installations, without the need for
hardwiring an external CT, please follow the above
diagram
Earth = Green / Yellow cable
Neutral = Blue cable
Live (L1) = Brown cable
The recommended torque setting for the electrical
terminals is 1.2Nm
For single phase installations, where 1 or more
external/additional CTs are required, please follow
the above diagram to connect the CTs. Use the extra
CT terminals in the same way if required.
Positive (+) = Red
Negative (-) = Black
For more details on CT installation and connection
see CT Sensor Installation (page 36)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Myenergi Zappi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Myenergi Zappi in the language / languages: English as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info