802097

Myenergi Zappi Manual

22
Zoom out
Zoom in
Previous page
1/52
Next page
The Advanced Settings menu is passcode protected.
The default passcode is 0 0 0 0 although it can be changed with the Passcode menu option.
–
Single Phase
The Phase setting is only used when installing a single phase onto a 3-phase
supply.
It should be set to match the phase number that the is wired to so that the power
measurements are correct and that the responds to the correct phase when using
the wireless sensor.
Three Phase
The Phase Rotation setting is only used on three phase units and should correspond to
the wiring to the input terminals. Only the following specific options are available:
• 1/2/3 (Phase 1 wired into “L1”, Phase 2 wired into “L2”, Phase 3 wired into “L3”)
• 2/3/1 (Phase 2 wired into “L1”, Phase 3 wired into “L2”, Phase 1 wired into “L3”)
• 3/1/2 (Phase 3 wired into “L1”, Phase 1 wired into “L2”, Phase 2 wired into “L3”)
See Three-Phase Systems(page 40) and Net Phases (page 24) for more information.
Single Phase only
When a single phase is installed on a 230V delta connected supply, it is necessary to tell which phase
has been connected to the neutral terminal.
Note: In most installations the Phase Return setting should be left as “N” for Neutral
Sets the maximum current that the will draw (including when boosting and FAST mode). This is useful if the
supply current is limited, for instance, if is connected on a 16A circuit instead of a 32A.
In some countries the electricity distribution company limit the maximum current that can flow in the neutral
conductor on a three phase supply (for example, the neutral current is limited to 20A in Germany). Use this setting if
a neutral current limit is specified for your installation.
Before starting a charge, carries out a check to make sure that the protective earth conductor is still connected.
This check only works in a TN or TT connected electricity supply. If you are on an IT supply or find that the protective
earth check is too sensitive then change this setting to “IT”.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Myenergi Zappi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Myenergi Zappi in the language / languages: English as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info