802097
14
Zoom out
Zoom in
Previous page
1/52
Next page
When using ECO or ECO+ charge modes, can be programmed to 'boost' the current charge at certain times.
When boosting, the charge rate is set to maximum (just like FAST mode), regardless of the amount of available surplus
power. This means that power may be drawn from the mains grid supply during boost times.
There are four editable time slots which can be set to operate for certain days of the week.
Setting the duration to 0h00 will make the boost inactive.
1.
From the main screen, press to enter Main Menu
2.
Select Boost Timer from within the Charge Settings menu.
The BOOST TIMER screen is then shown.
3.
The boost can now be edited: Use or buttons to highlight
the time slot you wish to change. The lower screenshot shows
the start hour being edited:
4.
Alter the start hour with the or buttons and then press
to move to minutes.
5.
Edit the duration in the same way and then press again to edit
the days of the week you want the boost to be active for. Each
day of the week can be toggled on/off with or buttons.
Press to go to the next day. Pressing on the last day
(Sunday) will confirm the boost time slot and the whole line will
be highlighted again.
6.
Press to exit the BOOST TIMER screen.
Boosting only when economy rate electricity is available can be achieved in one of three ways:
1.
By setting the boost timer to coincide with the economy tariff times. This option should be used only if
the electricity meter is a dual-rate meter (modern meters usually are).
2.
Boost only at set times AND if economy rate electricity is available.
3.
Automatically boost whenever the economy tariff rate electricity is available, regardless of boost times*
*Options 2 and 3 are available only when using the eSense input.
For option 1, the eSense Input in the Advanced menu should be set to Boost
Timer Enable.
With the Boost Timer Enable function set, the BOOST TIMER screen will include
an extra column. The e can be toggled on/off. If e is present, the boost will
activate only when the boost times are valid and the economy rate tariff is
available.
Alternatively the eSense input can be used to activate the boost whenever the economy tariff rate electricity is
available, regardless of boost times (option 2). To do this, the eSense Input option in the Advanced menu should be
set to Boost. When using this option, the Boost Timer is not needed.
If one or more boost times conflict, the boost will follow the latest time or longest duration
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Myenergi Zappi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Myenergi Zappi in the language / languages: English as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info