493663
31
Zoom out
Zoom in
Previous page
1/43
Next page
29
Menu Operations
be placed at the root path of your USB device.
1. Upgrade Mode: the mode of the upgrade to be choosed, Press [Vol◄/►] to
select Software, Whole, User Interface, Default DB, CAS and Ch.List &
Setting.
2. In theSoftwareitem press [Vol◄/►] to select the file which you want to
scan or press [OK] to open the “USB list” to select directly with [CH▲/▼],
and press [OK] to finish the selection.
3. Start: Press [OK] to start upgrade.
4. Once the file has been loaded, it requires the conformity to end the
upgrading process, writing into the receiver “Are you sure to burn flash ?”.
Press [OK] to upgrade the receiver. In case during the reading of the file, it
is corrupted or it would be a not appropriated for this model of receiver, an
alert message would appear “Error reading the USB disk”.
5. After pressing [OK] the receiver will write into the Flash memory, and it will
reboot to end the upgrading process.
NOTE:
The upgrade file is the binary file, *.bin. Only the files, which
extend name is bin, would be displayed. User need put the upgrade file
under root of USB card.
6.2.2 Backup To USB
This function allows you Dump Software
and Ch.List & Setting fo the receiver to
external hard drives.
1. press [Vol◄/►] to change the backup
mode. backup mode include: Dump
Software and Ch.List & Setting.
2. Mark “Start” on the master reeciver
and press [OK] to start Backup.
3. Press [MENU/EXIT] to save the
setting without Backup.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mvision HD450T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mvision HD450T in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info