Manual Mustek PowerMust 10000 (page 9 of 40) (English, German, French, Italian, Polish, Portuguese, Finnish)

677945

Zoom out

Zoom in

1/40

SAVE THESE INSTRUCTION-This manual contains important instructions that should be

followed during installation and maintenance of the UPS and batteries.

 Do not connect appliances or devices which would overload the UPS system (e.g. laser printers)

to the UPS output sockets.

 Place cables in such a way that no one can step on or trip over them.

 Do not connect domestic appliances such as hair dryers to UPS output sockets.

 The UPS can be operated by any individuals with no previous experience.

 Connect the UPS system only to an earthed shockproof outlet which must be easily accessible

and close to the UPS system.

 Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of your computer)

to connect the UPS system to the building wiring outlet (shockproof outlet).

 Please use only VDE-tested, CE-marked power cables to connect the loads to the UPS system.

 When installing the equipment, it should ensure that the sum of the leakage current of the UPS

and the connected devices does not exceed 3.5mA.

 Do not disconnect the mains cable on the UPS system or the building wiring outlet (shockproof

socket outlet) during operations since this would cancel the protective earthing of the UPS

system and of all connected loads.

 The UPS system features its own, internal current source (batteries). The UPS output sockets

or output terminals block may be electrically live even if the UPS system is not connected to the

building wiring outlet.

 In order to fully disconnect the UPS system, first press the OFF/Enter button to disconnect the

mains.

 Prevent no fluids or other foreign objects from inside of the UPS system.

 The UPS system operates with hazardous voltages. Repairs may be carried out only by

qualified maintenance personnel.

 Caution - risk of electric shock. Even after the unit is disconnected from the mains (building

wiring outlet), components inside the UPS system are still connected to the battery and

electrically live and dangerous.

 Before carrying out any kind of service and/or maintenance, disconnect the batteries and verify

that no current is present and no hazardous voltage exists in the terminals of high capability

capacitor such as BUS-capacitors.

 Only persons are adequately familiar with batteries and with the required precautionary

measures may replace batteries and supervise operations. Unauthorized persons must be kept

well away from the batteries.

 Caution - risk of electric shock. The battery circuit is not isolated from the input voltage.

Hazardous voltages may occur between the battery terminals and the ground. Before touching,

please verify that no voltage is present!

 Batteries may cause electric shock and have a high short-circuit current. Please take the

precautionary measures specified below and any other measures necessary when working with

batteries:

－remove wrist watches, rings and other metal objects

－use only tools with insulated grips and handles.

 When changing batteries, install the same number and same type of batteries.

 Do not attempt to dispose of batteries by burning them. This could cause battery explosion.

 Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin and eyes. It

may be toxic.

 Please replace the fuse only with the same type and amperage in order to avoid fire hazards.

 Do not dismantle the UPS system.

For Rack Tower Model

Tower

Rack

Attach mounting ears to the side mounting holes of

UPS using the screws provided and the ears should

face forward.

Lift the UPS module and slide it into rack enclosure. Attach the

UPS module to the rack with screws, nuts and washers

(user-provided) through its mounting ears and into the rack rails.

Button

Function

ON/Enter Button

 Turn on the UPS: Press and hold the button more than 0.5s to turn on the UPS.

 Enter Key: Press this button to confirm the selection in setting menu.

OFF/ESC Button

 Turn off the UPS: Press and hold the button more than 0.5s to turn off the UPS.

 Esc key: Press this button to return to last menu in setting menu.

Test/Up Button

 Battery test: Press and hold the button more than 0.5s to test the battery while in AC mode, or CVCF mode.

 UP key: Press this button to display next selection in setting menu.

Mute/Down Button

 Mute the alarm: Press and hold the button more than 0.5s to mute the buzzer. Please refer to section 3-4-9 for

details.

 Down key: Press this button to display previous selection in setting menu.

Test/Up + Mute/Down Button

 Press and hold the two buttons simultaneous more than 1s to enter/escape the setting menu.

1) Share current port (only available for parallel model)

2) Parallel port (only available for parallel model)

3) External battery connector

4) Intelligent slot

5) RS-232 communication port

6) USB communication port

7) Emergency power off function connector (EPO connector)

8) Input circuit breaker

9) Output terminals

10) Ground

11) Input terminals

12) Cooling Fan

13) External maintenance bypass switch port

14) Battery pack output circuit breaker

15) Maintenance bypass switch

PM 6000/10000 LCD Online IEC Ver si on: 1 .0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mustek PowerMust 10000 in the language / languages: English, German, French, Italian, Polish, Portuguese, Finnish as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mustek PowerMust 10000 Manual

Product: