288902
42
Zoom out
Zoom in
Previous page
1/46
Next page
42
CONTENTS
Symptom Cause
Solution
Playback
No Image is present
1. Operation Mode Selector is set to
camera mode
2. If using a TV, wrong channel is selected
3. Not connected properly
4. Wrong TV system
1. Set selector to Playback mode
2. Set TV to correct channel for video
playback
3. Reconnect the cables
4. Use NTSC or PAL TV system only.
Cannot transfer data
1. Incorrect cable connection
2. Camera is not turned on
1. Reconnect the cables
2. Turn on the camera
Cannot delete image
1. Operation Mode Selector is in Camera
mode
2. The image is protected
3. There are no images to delete
1. Select Playback mode/Delete Menu
2. From Playback mode, unprotect the image
3. Have fun. Take pictures.
Transfer
CF Card error 1. CF Card is not formatted
1. Reformat through DOS using CF Adapter
and PCMCIA slot.
Cannot open the
Photo Album
1. Software is not installed
2. Not using Windows 98 with USB
connection
1. Install the software (see chapter 4)
2-1. Use Windows 98 as your Operating
system
2-2. Use RS-232 connection (see chapter 3)
“Device not ready”
OR
Connection Failure
1. Camera is not powered on
2. USB not connected properly
3. USB host controller problem
4. USB data transfer error
5. Hardware compatibility problem
1. Power on the camera
2. Ensure USB cable is properly connected
3. Refer to the Control Panel/Systems/Device
Manager for more details
4. Unplug and reconnect the USB cable
5. Contact your computer vendor for help
Cannot connect at startup
or cannot transfer
image/thumbnail
1. RS232 port not functioning properly
2. Current Baud rate not supported
1. Use another RS232 port and check to see
if it works by connecting a mouse first.
2. Select a slower baud rate (from Settings)
and try again.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mustek mdc 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mustek mdc 800 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info