726080
6
Zoom out
Zoom in
Previous page
1/21
Next page
5.INSTALLATION
LOCATION
Be careful of noise or vibrations
WIRE
RELOCATION
• During cooling operation, the air conditioner will
dry the roomair, so please fix a pipe to drain all the
• Please let the indoor unit more than one metre
away from the TV set and the radio in order to
avoid the picture and noise interference.
• Powerful radio transmitters or any other devices
radiating high frequency radio waves can cause
the air conditioner to malfunction. Please consult
the dealer where you purchased the air
conditioner before installing it.
• Don't fix the unit in the dangerous region with
combustible gas or volatile matter.
• If the air conditioner operates in an atmosphere
containing oils (machine oil), salt (near a coastal
area), sulfide gas (near a hot spring), etc., such
substances may lead to failure of the air
conditioner.
• Please fix the unit in the stable place to avoid the
noise or vibrations.
The noise near the air outlet of the outdoor unit
may enter the air exit.
• Locate the outdoor unit where noise emitted by it
or hot air fromits air outlet will cause no nuisance
• If the air conditioner sounds abnormal during
operation, contact the dealer where you
purchased the air conditioner.
To avoid the electric shock, please link the air
conditioner with the ground. The plug in the air
conditioner has joined the ground wiring, please
don't change it freely.
The power socket is used as the air conditioner
specially.
• Don't pull the power wiring hard.
• If necessary, use the power fuse or the circuit,
breaker or the corresponding scale ampere.
water away from the air conditioner.
to your neighbours.
When linking
the air conditioner with the ground, observe the
local rulers.
If you want to change the power wiring, please
contact the centre service of the local MD electric
appliance.
If you move out or if it is desired to relocate the air
conditioner, consult your dealer, because special
skills to with draw Freon, purge air and perform
other operations are required.
6.MAINTENANCE
WARNING
CLEANING THE INDOOR UNIT AND REMOTE
CONTROLLER
CAUTION
Before you clean the air conditioner, be sure to
disconnect the power supply plug.
because it may damage or fade the surface of the
unit.
If you do not plan to use the unit for at least 1
month.
(1) Operate the fan for about half a day to dry the
inside of the unit.
(2) Stop the air conditioner and disconnect power.
(3) Remove the batteries from the remote
controller.
• Use a dry cloth to wipe the indoor unit and
remote controller.
• A cloth dampened with cold water may be used
on the indoor unit if it is very dirty.
• Never use a damp cloth on the remote controller.
• Do not use a chemically-treted duster for wiping
or leave such material on the unit for long,
• Do not use benzine, thinner, polishing powder, or
similar solvents for cleaning. These may cause the
plastic surface to crack or deform.
EN
Owner's manual
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MundoClima MUCSR-HF series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MundoClima MUCSR-HF series in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info