30282
50
Zoom out
Zoom in
Previous page
1/58
Next page
ROYAL evo
Seite 50
Col. 3
Servo signal format
A format (MPX / UNI) has already been se-
lected when you initially set up your new
model (Î18.6.).
If not all the servos (or other devices) con-
nected to the receiver are designed to work
with this signal format, you can make the
appropriate change at this point.
Col. 4
Servo calibration points
Here you define how many calibration points
are to be available in the Servo calibration
menu (Î 16.1.).
2P 2 points (e.g. for throttle, tow release)
3P 3 points (e.g. elevator, rudder)
5P 5 points
(if a non-linear travel is to be
compensated or required)
16.2.1. Special: MULTInaut IV
The MULTInaut function is available
only for fixed wing models!
The ROYALevo can control two MULTInaut IV receiver
units. This enables control of up to 8 loads (lamps, re-
lays, ...) and/or up to 8 servos in different operating
modes.
In the menu Servo Assignment you determine, to which
channels (receiver output) the MULTInaut signal is sup-
plied. The MULTInaut receiver units in the model must
be connected to the same channels (receiver outputs).
!
Using MULTInaut IVÎ 19.4.
16.2.2. Assigning servos for fixed wing models
The following transmitter controls / mixers are available,
depending on the model type (fixed-wing / helicopter):
Model type „fixed wing
Note
Aileron
Aileron signal only No mixing *
Elevator
Elevator signal only No mixing
Rudder
Rudder signal only No mixing
Throttle
Throttle signal only No mixing
Spoiler
Spoiler signal only No mixing
Flap
Flap signal only No mixing
L. gear
Retract signal only No mixing
Tow rel.
Tow release signal only No mixing
Brake
Brake signal only No mixing
Gyro
Gyro signal with all mixed signals from gyro
mixer
Mixture
Aux1
Aux2
AUX1/2 signal only No mixing
M.naut 1
M.naut 2
Control signal for MULTInaut IV Î 19.4.
all
free
mixers
all mixer as defined under "Mixer def." *
(Î Fehler! Verweisquelle konnte nicht
gefunden werden.) *
* Note for all mixers with Aileron as input
To ensure that aileron differential works correctly with
channels whose signal source is aileron, or a mixer with
an aileron input, the individual servos must be con-
nected to the receiver alternately.
Servo 1 AILERON+ left
Servo 5 AILERON+ right
Servo 6 FLAP+ left
Servo 7 FLAP+ right
16.2.3. Assigning servos for helicopters
Model type „Helicopter“
Note
Aileron
Roll signal only No mixing
for mechanical rotor head mixing
Elevator
Pitch-axis signal only No mixing
for mechanical rotor head mixing
Rudder
Yaw signal only No mixing
Throttle
Throttle signal with mixed throttle curve,
throttle limiter, direct throttle, throttle-cut
Spoiler
(for fixed wing models)
RPM
Speed regulator control
L. gear
Landing gear signal No mixing
Tow rel.
Tow release signal No mixing
Brake
Brake signal No mixing
Gyro
Gyro signal, including all mixed signals
from gyro mixer
Mixture
Mixture signal for special carburettors
Collect.
Collective pitch signal No mixing
for mechanical rotor head mixing
Thr.lim.
Throttle limiter signal No mixing
TAIL
Tail rotor signal, including all mixed signals
-> tail rotor (e.g. static tail rotor compensa-
tion / Revo-Mix)
HEAD f/b
HEAD le
HRAD ri
HEAD 4
Signal for swashplate servos **
HEAD f/b, le and ri for swashplates with
3-point linkage (e.g. 3-point 120q)
HEAD f/b, le, ri and 4 for swashplates with
4-point linkage (e.g. 4-point 90q)
(electronic swashplate mixing, CCPM)
** Note
To ensure that the electronic swashplate mixing works
correctly, the servos must be connected to the receiver
in a particular, pre-defined sequence. (Î 15.5.)
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo9 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo9

Multiplex ROYALevo9 User Manual - German - 58 pages

Multiplex ROYALevo9 User Manual - Dutch - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info