30268
73
Zoom out
Zoom in
Previous page
1/77
Next page
ROYAL evo 7
Page 72
quiries to establish which RF module you should use,
and which channels are approved for the region in
which you wish to fly your models.
22.4. Scanner for HFM-S Synthesizer RF
module
# 4 5170 35 MHz A- and B-band
# 4 5171 40/41 MHz band
# 4 5173 36 MHz
# 4 5172 72 MHz
Important: which channels can be used?
Regulations concerning the use of radio-controlled
models vary from country to country. Please make en-
quiries to establish which RF module you should use,
and which channels are approved for the region in
which you wish to fly your models.
The scanner allows you to monitor the frequency band,
and guards against channel clashes. The Scanner mod-
ule is simply plugged into the HFM-S Synthesizer RF
module, and is easy to fit at any time.
The scanner can carry out two tasks:
Checking your channel at power-on (Channel-Check)
The channel you select for the Synthesizer is checked
when you switch the transmitter on. If the channel is al-
ready in use, the Synthesizer stays switched off, and the
user is alerted to the situation by an on-screen warning.
If the scanner picks up no signal during this check, the
transmitter switches itself on in the normal way.
Scanning the whole frequency band
The scanner checks all channels of the frequency band
one by one. All the signals it detects are displayed in bar
graph form on the screen; the height of the bar indi-
cates the signal strength.
Detailed instructions for using the Scanner module for
the HFM-S Synthesizer RF module are supplied with the
module itself.
22.5. Trainer lead
# 8 5121
The ROYALevo7 can be used either as Teacher or Pupil
transmitter in a Trainer (buddy-box) system.
Any MULTIPLEX transmitter fitted with a 5-pin DIN
socket (MULTIPLEX multi-function socket) can be used
as a pupil transmitter. (Î 13.4.)
22.6. Diagnosis lead
# 8 5105
For carrying out adjustments to the model the receiver
can be operated in Diagnosis mode (DSC - Direct Servo
Control) via a cable, without the transmitter radiating an
RF signal, even if “your” channel is already in use. Con-
nect the transmitter (MULTIPLEX multi-function socket)
to the receiver (charge socket on the switch harness
# 8 5039 or # 8 5046) using the Diagnosis lead. Please
note: Diagnosis mode is only possible with MULTIPLEX
receivers which feature a combined Battery / Diagnosis
socket marked “B/D”.
22.7. Other accessories, spareparts
Item
Transmitter case
# 76 3323
Standard transmitter aerial, 110 cm
# 89 3002
Transmitter tray
# 8 5305
SpaceBox ROYALevo Basic transmitter
tray
# 8 5658
SpaceBox ROYALevo weather guard (op-
tional)
# 8 5655
PROFI transmitter neckstrap
# 8 5646
Neckstrap padding for # 8 5646 # 8 5641
“Cross-over” transmitter support strap
# 8 5640
PC lead (Î 23.)
# 8 5156
Receiver module for the MULTInaut IV
channel expansion system (Î 24.)
# 7 5892
For more information on accessories and replacement
parts please refer to the current main catalogue or our
internet website www.multiplexrc.de.
23. PC interface
The multi-function socket on the underside of the
ROYALevo transmitter provides a serial interface to a PC
in addition to the functions of charging, Trainer mode
and Diagnosis mode. This interface offers two functions:
x access to transmitter data
for data back-up, software update
x use with model flying simulators
23.1. Software update / data back-up
The facility to exchange data between transmitter and
PC provides the following possible functions:
x Data back-up
storing (backing-up) model memory data on your PC
x Software update (loading new software into the
transmitter)
The latter point in particular enables you to exploit en-
tirely new methods of updating the transmitter soft-
ware or installing new screen languages via the inter-
net. The PC software “ROYALevo DataManager“ and cur-
rent software updates in various national languages are
already available in the Download area of our internet
website: www.multiplexrc.de.
Important: please check the version of ROYALevo
DataManager you are using.
For the ROYALevo 7 a later version of the ROYALevo-
DataManager is required than is current at the time of
printing of these instructions (V1.06).
The connecting lead (PC lead # 8 5156) is available from
your local model shop.
23.2. Using a flight simulator
The ROYALevo7 can be used directly with many flight
simulators, without further expansion. The manufac-
turers of flight simulators offer special interface cables
for MULTIPLEX transmitters. If you have a query, please
address it to the simulator manufacturer.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo7 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo7

Multiplex ROYALevo7 User Manual - German - 77 pages

Multiplex ROYALevo7 User Manual - Dutch - 110 pages

Multiplex ROYALevo7 User Manual - French - 77 pages

Multiplex ROYALevo7 User Manual - Italian - 75 pages

Multiplex ROYALevo7 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info