30268
69
Zoom out
Zoom in
Previous page
1/77
Next page
ROYAL evo 7
Page 68
Spoiler
When you operate the Spoiler con-
trol (stick /
) both camber-
changing flaps deflect down to act
as landing aid:
Off = Offset for flap servos (see be-
low for notes on calibrating the AI-
LERON+ servos for four-flap gliders.
Travel = Aileron deflection at full
spoiler extension.
If ailerons are set to deflect up
when spoilers are extended, the re-
sult is known as the Butterfly or
Crow landing system.
Flap
When the flap control (F) is oper-
ated, both camber-changing flaps
deflect up or down to alter the wing
camber in order to optimise the
wing section for thermal and speed
flying:
Travel' = Up-flap deflection, e.g.
for speed flying
Travel# = D o w n - f l a p d e f l e c t i o n ,
e.g. for thermal flying
The values should be set so that the
camber of the wing section is con-
stant over the full wingspan, i.e. co-
ordinated flap and aileron travels.
Elevatr
-Tr
When the elevator stick is operated,
both flaps move up or down to
support the elevator response for
aerobatics (“snap-flap mixer”):
Travel' = Flap deflection when
down-elevator is applied
Travel# = F l a p d e f l e c t i o n w h e n
up-elevator is applied
The mixer can be switched on and
off at any time using the "SNAP-
FLAP" mixer switch (= I).
* appears only if the V-tail mixer is activated (= ON).
Note:
Special features when calibrating the following servos:
FLAP+ and AILERON+ (input: Spoiler, parameter:
Off = OFFSET)
Glider wings with four flaps can be set up to produce
the Butterfly or Crow landing system (max. aileron up-
travel, max. flap down-travel). In this case the flap servos
in particular have a highly asymmetrical working range:
Maximum up-aileron travel is required (approx. 20°). For
landing the flaps should deflect down as far as possible
to obtain best possible braking effect (if possible > 60°).
The servo travel in the “up” direction must be greatly
reduced, unless you have installed the output arms on
the servos at an angle (mechanical differential). This
means that valuable servo travel is sacrificed, and servo
power is lost. Unnecessary gearbox play, reduced posi-
tional accuracy and increased gearbox shock loading in
a hard landing have to be accepted.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo7 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo7

Multiplex ROYALevo7 User Manual - German - 77 pages

Multiplex ROYALevo7 User Manual - Dutch - 110 pages

Multiplex ROYALevo7 User Manual - French - 77 pages

Multiplex ROYALevo7 User Manual - Italian - 75 pages

Multiplex ROYALevo7 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info