30268
44
Zoom out
Zoom in
Previous page
1/77
Next page
ROYAL evo 7 - Instructions
Page 43
ENGLIS
H
15.7.4. Parameter: Zero point and
Collective Pitch display
Adjust. range
-100% ... 0 ... +100%
Under Zero point you can set the starting point for
the static tail rotor compensation mixer. From this col-
lective pitch angle in the direction of “climb” the collec-
tive pitch Æ tail rotor mixer is active using the value set
under
Coll.+. In the opposite direction (descent) the
mixer works with the value set under
Coll.- (Î
15.7.1.).
Procedure:
1. Move the collective pitch stick to the 0° pitch posi-
tion, using a rotor blade pitch gauge if possible.
Note that you must have set up the collective pitch
curve previously.
2. The value for
Coll. (last line) cannot be altered; it
just shows the current collective pitch stick posi-
tion, and is designed to help you when entering
this setting. Set this value in the parameter
Zero
Point
.
15.8. Mixer: Rotor head
(electronic swashplate mixer / CCPM)
for model helicopters only
The ROYALevo7 features a universal swashplate mixer
(CCPM) which caters for all swashplate types with three
linkage points / servos.
Two parameters are required to set up the mixer:
Geometry, Rotation
Note:
The main menu
Mixer is a dynamic menu; it only dis-
plays those mixers which are used in the current model.
The
Rotor head mixer only appears if you have in-
voked the model template
HELIccpm.
To ensure that the swashplate moves exactly as you
wish it to, the swashplate servos must be connected to
the receiver in the correct sequence. The channel as-
signment varies according to the servo configuration
Servo Config. you have chosen (Î 18.6.). You can
view this at any time in the Servo / Assignment menu
(Î 16.2.):
Servo Note
Head f/r
Front / rear swashplate servo
Head le
Left-hand swashplate servo
(
viewed from tail
)
Head ri
Right-hand swashplate servo
(
viewed from tail
)
15.8.1. Parameter:
Geometry
Adjust. range
90 ... 150q / -91 ... -150q
Default 120q
The Geometry parameter defines the angle between
the swashplate servo
Head f/r and the servos Head
le
and Head ri which are arranged symmetrically to
it.
Note
The angle must be entered with a negative prefix “ - “ if
the servo
Head f/r is at the front, as seen from the
tail (example 2).
Example 1:
3-point 120q swashplate
Geometry
+120q
Rotation
+0q
Example 2:
4-point 90q swashplate
Geometry
-90q
Rotation
+0q
15.8.2. Parameter:
Rotation
Adjust. range
Range -100° ...0° ... 100q
Default 0q
The Rotation parameter (also sometimes termed vir-
tual swashplate rotation) is required if:
x the swashplate in the model is mounted in such a
way that the
Head f/r servo does not coincide
with the flight axis;
x the model tends to roll when, for example, a pitch-
axis command is applied.
Virtual rotation clockwise * required
Æ negative values for
Rotation
Virtual rotation anti-clockwise * required
Æ positive values for
Rotation
*Swashplate viewed from above
Direction of
flight
Head 4
90q
Head riHead le
Head f/r
Direction of
fli
g
ht
Head f/r
120q
Head ri
Head le
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo7 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo7

Multiplex ROYALevo7 User Manual - German - 77 pages

Multiplex ROYALevo7 User Manual - Dutch - 110 pages

Multiplex ROYALevo7 User Manual - French - 77 pages

Multiplex ROYALevo7 User Manual - Italian - 75 pages

Multiplex ROYALevo7 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info