30266

Multiplex ROYALevo12 Manual

22
Zoom out
Zoom in
Previous page
1/57
Next page
Instructions
Page 77
3. Press the ENTER button (or one of the 3-D digi
adjustors) to release the parameter for changing.
With the UP/DOWN buttons s t (or one of the 3-
D digi adjustors) you can now select one of the two
languages:
Your selection is confirmed by pressing ENTER (or
one of the 3-D digi adjustors) and you will leave
the parameter field.
Note on memorisation of modifications:
Modified values/settings are stored immediately in
the model memory. No manual storing procedure is
required.
' TIP !
Using the REV/CLR button
The value of a parameter can be changed using the
UP/DOWN (s t) buttons or one of the two 3-D digi-
adjustors, but in addition REV/CLR button can also be
used to reverse many values, or reset them to the de-
fault (standard) setting.
10.3.4. Returning from whence you came
When you quit the value/setting field the cursor moves
back to the last used parameter field.
To leave the sub-menus and main menus simply move
to the 2nd line „¨ Exit “ and then press the ENTER
(or one of the 3-D digi adjustors), until you return to the
status display.
Fig. 1 Fig. 2
' TIP !
Direct switching to other main menus
If you are in one menu and wish to move straight to
another main menu, you can do this directly by pressing
the relevant direct menu access button.
' TIP !
Back to the status display
Pressing any direct menu access button twice takes you
quickly and directly to the status display you last used
(provided that you are not currently located at a pa-
rameter value).
11. Digital trims
11.1. Introduction
The ROYALevo features modern digital trims for the 4
primary control axes (stick functions).
The trims of the ROYALevo operate on the “Centre Trim”
principle, i.e. trim corrections only affect the range a-
round the centre of the stick travel, and not the end-
points. The advantage compared with conventional
trims is that the full control travel (and thus servo travel)
remains available, so you do not need to provide a re-
serve for trimming.
Top
end-point
Standard trim
The diagram shows what happens when the stick is
moved to the right: the servo moves to the top end-
point before the stick reaches its end-point. This means:
dead zone at one extreme of stick travel.
When the stick is moved to the left, the servo fails to
reach the bottom full travel point. That means: full servo
travel is not available.
Centre trim
Both servo end-points are always reached, regardless of
the trim position.
' TIP !
Since the response curve of the transmitter control is
altered when you adjust the “Centre Trim”, it is impor-
tant that trim corrections should be relatively small. If
major corrections are required, always adjust the me-
chanical linkage!
11.2. Advantages of digital trims
Digital trims have two important advantages:
1. The trim buttons do not have a mechanical position
corresponding to the trim value (as is the case with
a conventional trim system with trim sliders). The
trim setting of the digital trim is displayed on the
screen, and the trim values are stored in the model
memory. If you change to a different model mem-
ory, the trim is immediately correct; you do not
have to move the trim slider to adjust the transmit-
ter to the new model.
2. The ROYALevo features flight phases, and each
phase features its own trim memory for models u-
sed with flight phases. Each flight phase can easily
be trimmed accurately and independently of the
other phases.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo12 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo12

Multiplex ROYALevo12 User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info