561575

Multiplex Profi TX 9 Manual

218
Zoom out
Zoom in
Previous page
1/227
Next page
Glossary of technical terms
PROFI TX
Differential
Indicates the percentage by which the travel distance of the control surface
down is reduced relative to the travel distance up; if the differential is set to 50%,
the travel distance down is half as great as the travel distance up. The higher
the % value, the shorter the travel distance of the control surface down.
Differential is required because the downward control surface generates greater
drag than the upward control surface. This results in a negative turning moment
(known as adverse yaw) which tends to push the model out of the turn.
Digital trim
The physical position of a conventional trim with trim slider corresponds to the
actual trim value, while digital trim buttons do not. The digital trim position is
displayed on the screen, and the trim values are stored in the model memory.
If you switch model memories, there is no need to move the trim sliders to the
correct position to suit the model. The correct trims are immediately available.
If the PROFI TX is used with a model for which you have set up multiple flight
phases, each flight phase has its own trim memory, i.e. it is simple to trim each
flight phase accurately, and independently of the trims in the other phases.
DTC
Direct Throttle Control
If DTC is switched on, the throttle channel (regardless of whether it acts upon a
carburettor or a speed controller) is controlled directly by the transmitter control
assigned to throttle limiter, and is independent of the position of the collective
pitch stick.
Dual rate (D/R)
Alters the sensitivity of particular transmitter controls. If the D/R parameter for a
control function (e.g. Aileron) is set to 50% you can use the assigned switch to
reduce the control surface travels on the model by half for finer control. The
control curve in the graph changes accordingly when you operate the switch
assigned to dual rate.
… 218 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Profi TX 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Profi TX 9 in the language / languages: English as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex Profi TX 9

Multiplex Profi TX 9 User Manual - German - 233 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info