Manual Multiplex Power Peak A4 EQ-LCD - 30 8560 (page 11 of 48) (English, German, French, Italian, Spanish)

628913

Zoom out

Zoom in

1/48

Table of contents

Power Peak® A4 EQ-LCD

Dear customer,

Thank you for purchasing the 12V DC Power

Peak

A4 EQ-LCD rapid charger from the Multiplex

range. Although the charger is extremely easy to

use you should, nevertheless, take care to thor-

oughly read the operating instructions and safety

information before using your new charger.

Safety Information

The Power Peak

A4 EQ-LCD is designed

for charging rechargeable lithium and NiMH

batteries. Due to the risk of explosion, do not use

the charger to charge dry batteries.

Never place the charger and connected

batteries on combustible surfaces. Never

use the charger in the vicinity of combustible

materials or gases.

• The charger is designed for operation only for

11...15V DC operation, therefore, never ope-

rate the charger with a different voltage rating.

• Protect the charger from dust, dirt and mois-

ture.

• Do not expose the charger to excessively low

or high temperatures as well as direct sun-

light.

• Make sure the Power Peak

A4 EQ-LCD

charger is not exposed to impact, pressure or

excessive vibration load.

• Do not leave the charger unattended during

operation. The charger can heat up consi-

derably during normal operation.

• Ensure the cooling openings are always clear

to allow air to freely circulate (never place on

carpeted or felt surfaces).

• When not used for a longer period of time,

unplug the charger from the power source

and disconnect any batteries.

• Do not charge rechargeable batteries twice in

quick succession.

• Do not charge batteries that are at a high tem-

perature.

Allow batteries to cool down to ambient tem-

perature.

• Only cells of the same capacity and of the

same make may be charged together.

• Never charge two batteries connected in par-

allel to one output, connect only one rechar-

geable battery pack at a time.

• Ensure correct polarity of the battery and

avoid short-circuits .

• Closely follow the instructions provided by the

battery manufacturer.

• Check for damage to the casing and leads.

Note:

Pay particular attention to the safety instruc-

tions provided by the battery manufacturer.

2. General Description

The Power Peak

A4 EQ-LCD is an inexpensive yet high quality 12V DC rapid charger in a metal cas-

ing for charging 1...4-cell 3.7 Volt LiPo batteries and 4...8-cell NiMH batteries with integrated equalizer

and large LC display showing current, voltage and capacity. The number of cells in LiPo batteries is

identified automatically.

The charging current can be set in the range from 300 to 3,000mA. The recommended charging rate

is 1C (battery capacity = charging current), please refer to ‚Charging the Battery‘.

The charging progress and the end of charging are indicated by the status LED and the beeper.

By connecting to the power supply unit, which is included in delivery specification No. 8560, the

charger can be operated from the 230 Volt mains power supply, thus making it a 230 V AC and 12 V

DC charger.

# 30 8560

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Power Peak A4 EQ-LCD - 30 8560 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex Power Peak A4 EQ-LCD - 30 8560 Manual

Product: