Manual Multiplex EUROPAmc (page 17 of 32) (English)

30222

Zoom out

Zoom in

1/32

there a short-cut

you

only

want

to change

reverse one mixer input?

You can use OUICK-SELECTto by-pass the selection of the

transmitter

control

and move directly

to setting up

/ reversing

a control.

Select the

point

X-MIX

but do not activate it

Press the

bufton

twice

(or

+ four

times).

Select the transmitter control using

QUICK-SELECT

Then move

briefly the conüol whose input

you

want

to adjust.

The

code

number for

the selected control will flash, and

the two

arrows

will

appear

the display.

Use the +/- buttons to reverse

the

mixer input.

Press the R button

reverse

the

input.

Move

the

control

and

watch

the effects on the model.

3. Return lo the Status display

Press

the

button, then

Example: V-tail

In the following example

the transmitter

will

be set up as follows:

Stick

1 for RUDDER

and

StiCK

2 for ELEVATOR,

The V-tail must

then be operated by servos

and 2. Sticks 1 and 2

should

be connected to sockets 1 and 2

on lhe transmitter circuit board

(standard position).

you

give

an ELEVATOR command, the

two control surfaces on the

model

should deflect

opposite directions

(both

surfaces towards the

fuselage centre or away from the fuselage, i.e.

both up, both down).

lf a RUDDER command is

given,

the two control surfaces on the

model

should deflect

the same direction

(both

surlaces left or right).

Activate X-MIX

and set up the

mixer

As always, we start from the Status

display, and the assumption that

X-

MIX is not

already activated.

you

are

not

sure, erase the model

memory.

Switch off the transmitter

Press

the

button,

hold it in,

and switch the transmitter on

aqain

Press R

once

1. Sefect the

point

X-MIX and activate it

Press the

button twice

(or

+ four times), then E.

code

number

should

now

flashing.

QUICK-SELECT

for RUDDER

Move the

left-hand

stick to one side.

3. OUICK-SELECT

lor ELEVATOR

Move the

right-hand

stick foMard or back.

4. Move on to adiusting / reversing the inputs

Press

the

button.

You can now adjust lhe mixer input using

the

+/-

buttons.

lf both control

surfaces

move in

the

wrong

direction,

reverse

the

mixer inputs

using the

button.

only one surface works

incorrectly,

return

to the menu

point

SERVO and reverse the

corresponding servo only.

You can switch between

the two

mixer inouts

using QUICK-SELECT.

5. Return to the Status display

Press

the

button, then

BEI

Fig.12:

V tail

€

E/E

Eß,

45 67

rlz

7Eo

/l\

GB-17-

trEt

Manual EUROPA mc

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex EUROPAmc in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex EUROPAmc

Multiplex EUROPAmc User Manual - German - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex EUROPAmc Manual

Product: