30222
13
Zoom out
Zoom in
Previous page
1/32
Next page
4.
Setting travel
with
the
+/-
buttons
Hold
the stick at one end-point. Adjust the travel using
the
+/-
buttons, and watch the effect on
your
model.
5.
Resetting
to
100o/.
(if
required)
Pressing
the
R
button
resets
the reduced travel to 100%. This
may be necessary, for example, it
you
decide to use the DR
switch as a
normal
switched channel.
6.
Return to
the operating display
Press
the
E
button
first.
then R.
Using channels I and I as
switched channels
lf
you
have
connected switches to channels
8 and/or 9, these switches
always work as DR switches for channels 1
and
2.
This
effect can be eliminated by setting DR
travel to
100%. There
are
two
ways
of doing this.
a. Erase the model memory
Caution:
if
you
do this, allother settings which
you
have
programmed
for
this
model memory
will also be
erased.
Brief instructions:
'I
.
Switch off the transmitter.
2. Hold button R
pressed
in,
and switch on the transmitter.
The
code
number
of the active model memory
should
now flash.
3.
Press the R
button once
more.
b. Set
DR
travel for channels 1
and/or channel
2
to
100%
You
can only do this if
you
have selected
lhe
menu
point
for
adlusting
DR travel.
ll
you
have
fifted two DR
switches,
you
must make
the
adjustments separately
for
both switches.
Briet instructions:
As
usual,
we
start
from
the Status display.
1.
Select the
menu
point
DR MN, but do not
activate
it.
2.
Select channel
1
or
2
using
QUICK-SELECT.
Move
the appropriate DR switch to the DR ON
position.
You
should see both arrows
in
the display.
Press the R button to set travel
to
100%.
Check servo travel
lor
both switch
positions.
Repeat
points
2 to 4 lot the second
channel.
5.
Return
to the Status display
Press button E first,
then
R.
EE
A
E/8...
@r
roo.u"
Btr
t14
,.,ifötili[
EI
GNx...,
B
@r
rooz.
trB
7
.a
DR is
ON
GB-13
Manual EUROPA
mc
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex EUROPAmc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex EUROPAmc in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex EUROPAmc

Multiplex EUROPAmc User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info