30222
9
Zoom out
Zoom in
Previous page
1/32
Next page
How
to set up the transmitter?
The following
text describes briefly all the essential
steps
required
to
program
thetransmitter, butwe have not included
a detailed explanation.
lf
you
need more informalion,
please
refer
to the sections on X-,lt Xand
Y- MIX,
as
mentioned
below.
Activate x-Mlx
As
always,
we
start
from
the Status
display, and
from
the assumption
that no mixers are
aclive.
lf
you
are
not
sure we suggest
that
you
erase
the
model memory first.
.
Switch the transmitter off
.
Press
the
R
button,
hold
it in,
and switch the transmitter
on again.
.
Press the R
butlon once
more.
1. Select the menu
point
X-MlX
and activate it
Press
the + button four times
(or
-
twice), then E.
One code number
should
now
be
flashing.
2.
QUICK-SELECT
for RUDDER
Move
the
left-hand
stick to one side.
3. QUICK-SELECT tor SPEED
Move
the
right-hand
stick foMard
or back.
lf vou make a mistake:
You
cannot activale more
lhan two controls. You will have
to
erase one
of the two controls first.
Select the accidentally activated
control using the +/- buttons. A
press
of the R button
erases that control, and
you
can
now
select
the correct channel.
4. Back to the Status
display
Press the E button
twice, then
B.
Activate Y-MIX
1. Select the menu
point
Y-MlX
and activate it
Press the
-
button
(or
+
five
times), then E.
One code
number
should now be flashing.
2. Use
QUICK-SELECT
for
control 3
(auxiliary
channel)
lvlove
the
righthand
stick to
one side.
This
control operates servo 3,
but
it
does
not
alfect both motors.
However, it is required
as auxiliary conlrol
so that control
1
(RUDDEB)
can be mixed in to it.
3.
QUICK-SELECT
for RUDDER
(control
1)
Move
the
left-hand
stick to one side.
lf vou
make a mistake: see above
(X-MlX).
Before
you
finish the
activation orocess:
Check that code number 1 is flashing.
lf not.
oress the + button once.
4. Return to the Status
display
Press
the
E
button twice, then
R.
Check the servo directions and correct if necessary
.
lf
both
motors
turn the
wrong
way:
Reverse control 2
(speed)
under the menu
poinl
X-MIX.
.
lf
only one
motor
or the rudder work in
the
wrong
sense:
Reverse
the servo under the
menu
point
SERVO.
Adjust servo travel
and centrc
lor
the rudder
and the two
speed controllers
.
These
adjustments
must
be carried out
under the
menu
point
SERVO.
EEB
BBtr
EB
E
BB
ffir
Eß,
flIT}
lhf:Jlt
14
'II
GB-9-
10
Manual
EUROPA mc
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex EUROPAmc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex EUROPAmc in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex EUROPAmc

Multiplex EUROPAmc User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info